Dry Friction Properties of Diamond-Coated Silicon Carbide
Materials · 10.05.2023 · 16 (10) · 3640
DOI: 10.3390/ma16103640 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.05.2023. Verfasst von Yuefeng Du und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institut…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, the Science and Technology Innovation 2025 Major Projects, Ningbo, China, National Key R&D Program of China.
Abstract (Originalsprache)
Dry friction between seal faces, caused by unstable or extreme operating conditions, significantly affects the running stability and service life of mechanical seals. Therefore, in this work, nanocrystalline diamond (NCD) coatings were prepared on the surface of silicon carbide (SiC) seal rings by hot filament chemical vapor deposition (HFCVD). The friction test results under dry environment reveals that the coefficient of friction (COF) of SiC–NCD seal pairs is about 0.07–0.09, which were reduced by 83–86% compared to SiC–SiC seal pairs. The wear rate of SiC–NCD seal pairs is relatively low, ranging from 1.13 × 10−7 mm3/N·m to 3.26 × 10−7 mm3/N·m under different test conditions, which is due to the fact that the NCD coatings prevent adhesive and abrasive wear between the SiC seal rings. The analysis and observation of the wear tracks illustrate that the excellent tribological performance of the SiC–NCD seal pairs is due to a self-lubricating amorphous layer formed on the worn surface. In conclusion, this work highlights a pathway to enable mechanical seals to satisfy the high application requirements under highly parametric working conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering (NIMTE), Chinese Academy of…
- Ningbo FLK Technology Co., Ltd., Ningbo 315104, China.
- State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China.
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
Förderung
- National Key R&D Program of China
- the Science and Technology Innovation 2025 Major Projects, Ningbo, China
- National Key R&D Program of China
Zitieren
APA
Du, Y., Xie, F., Wang, J., Xu, B., Chen, H., Yan, B., Wu, Y., Huang, W., & Li, H. (2023). Dry Friction Properties of Diamond-Coated Silicon Carbide. Materials, 16(10), 3640. https://doi.org/10.3390/ma16103640
Vancouver
Du Y, Xie F, Wang J, Xu B, Chen H, Yan B, et al. Dry Friction Properties of Diamond-Coated Silicon Carbide. Materials. 2023;16(10):3640. doi:10.3390/ma16103640
BibTeX
@article{Du2023,
author = {Du, Yuefeng and Xie, Fangmin and Wang, Jian and Xu, Bin and Chen, Huanyi and Yan, Bineng and Wu, Yanjiao and Huang, Weifeng and Li, He},
title = {Dry Friction Properties of Diamond-Coated Silicon Carbide},
journal = {Materials},
year = {2023},
volume = {16},
number = {10},
pages = {3640},
doi = {10.3390/ma16103640}
}
EUVIMED