The Evolution of Thermoplastic Raw Materials in High-Speed FFF/FDM 3D Printing Era: Challenges and Opportunities
Materials · 09.03.2025 · 18 (6) · 1220
DOI: 10.3390/ma18061220 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 09.03.2025. Verfasst von Antreas Kantaros und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Design and Production Engineering, University of West Attica, 12244 Athens, Greece. Die Arbeit wurde bisher 83-mal zitiert (Crossref) und nennt 116 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The evolution of thermoplastic materials has played a critical role in advancing high-speed Fused Filament Fabrication (FFF) and Fused Deposition Modeling (FDM) 3D printing technologies. This study explores the performance and challenges associated with next-generation thermoplastics specifically designed for high-speed printing, such as high-speed PLA, ABS, and PETG, in comparison to conventional materials. A systematic analysis was conducted to evaluate the key parameters, including the mechanical properties, layer adhesion, surface finish, and dimensional accuracy, under varying high-speed printing conditions. The results reveal that high-speed thermoplastics, when coupled with advanced hardware and optimized motion control systems, achieve up to a 70% reduction in printing time without significant trade-offs in mechanical integrity or precision. Additionally, the study identifies challenges, such as increased thermal stresses, warping, and the need for precise cooling strategies, which can impact material performance at elevated speeds. Opportunities for future development are also discussed, including the design of novel polymer formulations and hardware innovations to further enhance the reliability and scalability of high-speed FFF/FDM printing. This work underscores the potential of adopting such advanced thermoplastic materials in the high-speed 3D printing era and highlights the critical interplay between material science and hardware engineering for achieving next-generation manufacturing capabilities.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial Design and Production Engineering, University of West Attica, 12244 Athens, Greece.
- Doctoral School of Political Sciences, Faculty of Political Sciences, University of Bucharest, 050107 Bucharest, Romania.
ORCID-Profile: Antreas Kantaros, Theodore Ganetsos
Zitieren
APA
Kantaros, A., Katsantoni, M., Ganetsos, T., & Petrescu, N. (2025). The Evolution of Thermoplastic Raw Materials in High-Speed FFF/FDM 3D Printing Era: Challenges and Opportunities. Materials, 18(6), 1220. https://doi.org/10.3390/ma18061220
Vancouver
Kantaros A, Katsantoni M, Ganetsos T, Petrescu N. The Evolution of Thermoplastic Raw Materials in High-Speed FFF/FDM 3D Printing Era: Challenges and Opportunities. Materials. 2025;18(6):1220. doi:10.3390/ma18061220
BibTeX
@article{Kantaros2025,
author = {Kantaros, Antreas and Katsantoni, Meropi and Ganetsos, Theodore and Petrescu, Nicolae},
title = {The Evolution of Thermoplastic Raw Materials in High-Speed FFF/FDM 3D Printing Era: Challenges and Opportunities},
journal = {Materials},
year = {2025},
volume = {18},
number = {6},
pages = {1220},
doi = {10.3390/ma18061220}
}
EUVIMED