Microstructure Evolution and Mechanical Properties of Dual-Phase AlCrFe2Ni2 High-Entropy Alloy Under High-Strain-Rate Compression
Materials · 07.03.2025 · 18 (6) · 1191
DOI: 10.3390/ma18061191 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.03.2025. Verfasst von Hang Yan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Innovation & Interdisciplinary Institute of Low Carbon Metallurgical Engineering, School of Materials and Energy, Guangdong University of Technology,…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Guangdong Province.
Abstract (Originalsprache)
This paper investigates the effect of strain rate on the mechanical deformation and microstructural development of dual-phase AlCrFe2Ni2 high-entropy alloy during quasi-static and dynamic compression processes. It is revealed that the as-cast AlCrFe2Ni2 alloy is composed of a mixture of FCC, disordered BCC, and ordered B2 crystal structure phases. The alloy shows excellent compressive properties under quasi-static and dynamic deformation. The yield strength exceeds 600 MPa while the compressive strength is more than 3000 MPa at the compression rates of 30% under quasi-static conditions. Under dynamic compression conditions, the ultimate compression stresses are 1522 MPa, 1816 MPa, and 1925 MPa with compression strains about 12.8%, 14.7%, and 18.2% at strain rates of 1300 s−1, 1700 s−1 and 2100 s−1, respectively. The dynamic yield strength is approximately linear with strain rate within the specified range and exhibit great sensitivity. The strong localized deformation regions (i.e., adiabatic shear bands (ASBs)) appear in dynamically deformed samples by dynamic recrystallization due to the conflicting processes of strain rate hardening and heat softening.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Innovation & Interdisciplinary Institute of Low Carbon Metallurgical Engineering, School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China.
- School of Materials Science and Engineering, North University of China, Taiyuan 030051, China.
- School of Iron and Steel, Soochow University, Suzhou 215021, China.
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.
ORCID-Profile: Yu Wang, Shichao Liu, Shougang Duan
Förderung
- Natural Science Foundation of Guangdong Province
Zitieren
APA
Yan, H., Wang, Y., Gan, X., Dong, Y., Liu, S., Duan, S., & Mao, L. (2025). Microstructure Evolution and Mechanical Properties of Dual-Phase AlCrFe2Ni2 High-Entropy Alloy Under High-Strain-Rate Compression. Materials, 18(6), 1191. https://doi.org/10.3390/ma18061191
Vancouver
Yan H, Wang Y, Gan X, Dong Y, Liu S, Duan S, et al. Microstructure Evolution and Mechanical Properties of Dual-Phase AlCrFe2Ni2 High-Entropy Alloy Under High-Strain-Rate Compression. Materials. 2025;18(6):1191. doi:10.3390/ma18061191
BibTeX
@article{Yan2025,
author = {Yan, Hang and Wang, Yu and Gan, Xilin and Dong, Yong and Liu, Shichao and Duan, Shougang and Mao, Lingbo},
title = {Microstructure Evolution and Mechanical Properties of Dual-Phase AlCrFe2Ni2 High-Entropy Alloy Under High-Strain-Rate Compression},
journal = {Materials},
year = {2025},
volume = {18},
number = {6},
pages = {1191},
doi = {10.3390/ma18061191}
}
EUVIMED