Effect of high strain rate on the hot deformation behavior and microstructural evolution of dual-phase NiAlCrFeMo high-entropy alloy
Journal of Vacuum Science & Technology A · 01.05.2026 · 44 (3)
DOI: 10.1116/6.0005170 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 10.04.2026. Verfasst von Jiaqi Miao und 6 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shaanxi Province.
Abstract (Originalsprache)
Dynamic impact tests were conducted on the Ni61Al17Cr10Fe10Mo2 high-entropy alloy (HEA) using a Split Hopkinson Pressure Bar at 25, 350, and 700 °C under strain rates of 3000, 3500, and 4000 s−1. Microstructural evolution and deformation behavior were characterized by x-ray diffraction, electron backscatter diffraction, and transmission electron microscopy. Under high strain-rate loading, no continuous flow softening was observed, and the stress rapidly increased to above 800 MPa in the elastic region. At 4000 s−1, the yield strength reached a maximum of 1056.64 MPa at 700 °C. The yield strength exhibited temperature and strain-rate-dependent strengthening. Yield strength decreased with increasing strain rate at 25 °C but increased at 350 and 700 °C. High strain-rate deformation resulted in more significant dislocation entanglement compared with low strain-rate thermal compression. At 25 °C, plastic deformation was dominated by pronounced dislocation accumulation. At 350 °C, thermal activation promoted partial dynamic recovery and incipient dynamic recrystallization (DRX). At 700 °C, extensive DRX accompanied by crystallographic orientation and texture evolution effectively accommodated dislocations and relaxed internal stresses. This study provides new insights into the temperature-dependent strengthening mechanisms of HEAs, which is valuable for the design and development of advanced materials for extreme environments.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shaanxi Province
Zitieren
APA
Miao, J., Huo, Y., Zhou, Z., Jiang, A., Wang, Z., Crabbe, M. J. C., & Yue, G. X. (2026). Effect of high strain rate on the hot deformation behavior and microstructural evolution of dual-phase NiAlCrFeMo high-entropy alloy. Journal of Vacuum Science & Technology A, 44(3). https://doi.org/10.1116/6.0005170
Vancouver
Miao J, Huo Y, Zhou Z, Jiang A, Wang Z, Crabbe MJC, et al. Effect of high strain rate on the hot deformation behavior and microstructural evolution of dual-phase NiAlCrFeMo high-entropy alloy. Journal of Vacuum Science & Technology A. 2026;44(3). doi:10.1116/6.0005170
BibTeX
@article{Miao2026,
author = {Miao, Jiaqi and Huo, Yuanming and Zhou, Zixin and Jiang, Anqi and Wang, Zhijun and Crabbe, M. James C. and Yue, Gabriel Xiao-Guang},
title = {Effect of high strain rate on the hot deformation behavior and microstructural evolution of dual-phase NiAlCrFeMo high-entropy alloy},
journal = {Journal of Vacuum Science & Technology A},
year = {2026},
volume = {44},
number = {3},
doi = {10.1116/6.0005170}
}
EUVIMED