EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Synthesis Route on Composition and Main Properties of Mullite Ceramics Based on Waste

Alina-Ioana Badanoiu, Stefania-Paula Stoleriu, Alexandru-Cosmin Carocea, Mihai-Alexandru Eftimie iD, Roxana Trusca

Materials · 28.02.2025 · 18 (5) · 1098

DOI: 10.3390/ma18051098 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.02.2025. Verfasst von Alina-Ioana Badanoiu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Science and Engineering of Oxide Materials and Nanomaterials Department, Faculty of Chemical Engineering and Biotechnology, National University of Sc…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mullite, 3Al2O3·2SiO2, is a material with excellent thermal and mechanical properties. Two types of waste sand, rich in impurities, were employed as precursors for mullite ceramic synthesis. Two different synthesis routes were used: (i) solid-state reactions involving a sand and bauxite mixture, and (ii) precipitation synthesis, where alumina was deposited on sand particle surfaces; the sintering process was performed at temperatures ranging from 1300 °C to 1400 °C. Mullite was obtained as the main phase when the ceramics were obtained by solid-state reactions opposite to the second method, in which a composite ceramic with a specific microstructure, i.e., sand particles embedded in a matrix formed by alumina crystals, was assessed by electronic microscopy. The main properties, i.e., the apparent density, open porosity, compressive strength and thermal expansion coefficient (CTE) of the obtained materials were influenced by the composition and microstructure as well as the sintering temperature. The ceramics in which mullite was the main phase had slightly lower CTE’s and did not exhibit any phase transition in the 20–900 °C range. The results presented in this article highlight the importance of the synthesis route correlated with the nature of the precursors, the type and amount of impurities and the sintering temperature.

Schlagwörter

Stichwörter der Autor:innen

compositionmicrostructuremulliteprecipitationpropertiessolid-state reactionwaste

Autor:innen und Institutionen

  • Science and Engineering of Oxide Materials and Nanomaterials Department, Faculty of Chemical Engineering and Biotechnology, National University of Science and Technology Politehnica Bucharest, 1-7 Gh. Polizu Street, Sec…

ORCID-Profile: Mihai-Alexandru Eftimie

Zitieren

APA

Badanoiu, A. I., Stoleriu, S. P., Carocea, A. C., Eftimie, M. A., & Trusca, R. (2025). Influence of Synthesis Route on Composition and Main Properties of Mullite Ceramics Based on Waste. Materials, 18(5), 1098. https://doi.org/10.3390/ma18051098

Vancouver

Badanoiu AI, Stoleriu SP, Carocea AC, Eftimie MA, Trusca R. Influence of Synthesis Route on Composition and Main Properties of Mullite Ceramics Based on Waste. Materials. 2025;18(5):1098. doi:10.3390/ma18051098

BibTeX
@article{Badanoiu2025,
  author = {Badanoiu, Alina-Ioana and Stoleriu, Stefania-Paula and Carocea, Alexandru-Cosmin and Eftimie, Mihai-Alexandru and Trusca, Roxana},
  title = {Influence of Synthesis Route on Composition and Main Properties of Mullite Ceramics Based on Waste},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {5},
  pages = {1098},
  doi = {10.3390/ma18051098}
}
Kostenlos starten →