EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Yb on Microstructure and Mechanical Properties of Al-Cu-Mn Heat-Resistant Aluminum Alloys

Chifu Huang, Hailong Yang, Yu Xiong, Nannan Jia, Junhong Nong, Liwen Pan

Materials · 21.02.2025 · 18 (5) · 958

DOI: 10.3390/ma18050958 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.02.2025. Verfasst von Chifu Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Key Research and Development Program, 2021 Special funds for central guidance of local scientific and technological development funds, Specific Research Project of Guangxi for Research Bases and Talents.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of Yb on the microstructure and tensile properties at room temperature and high temperature (350 °C) of as-cast and T6 heat-treated Al-6Cu-0.4Mn alloys was investigated. The results show that Yb can refine the α-Al primary grain and α-Al + Al2Cu eutectic structure. The eutectic structure of the alloy containing 0.3 wt.%Yb has the best refining effect. After the T6 heat treatment, most of the network α-Al + Al2Cu eutectic structure disappeared, and many dispersed (200–400 nm) θ′-Al2Cu phases were precipitated in the matrix. With the addition of Yb, the amount of θ′-Al2Cu phases increases, and the average size decreases from 260 nm in the base alloy to 176 nm in the Yb-containing alloy, which indicates that Yb can promote the precipitation and refinement of the θ′-Al2Cu phase; after adding Yb, the high-temperature ultimate tensile strengths (UTS) of the as-cast and heat-treated alloy significantly increase. Both reached their highest when the Yb additions were 0.3 wt.%, reaching 95.5 MPa and 142.3 MPa, respectively, 13.66% and 17.71% higher than the base alloy. The thermal exposure test at 350 °C shows that Yb can improve the θ′-Al2Cu phase’s coarsening resistance. Analysis shows that the improvement of mechanical properties at room temperature is due to solid solution strengthening and grain refinement of Yb. The reason for improving mechanical properties at high temperatures is that adding Yb promotes the precipitation, refinement, and thermal stability of the θ′-Al2Cu phase.

Schlagwörter

Stichwörter der Autor:innen

Ybheat-resistant aluminum alloymechanical propertiesmicrostructurethermal stability

Autor:innen und Institutionen

  • School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.
  • State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, Guangxi University, Nanning 530004, China.
  • Key Laboratory of High Performance Structural Materials and Thermo-Surface Processing, Education Department of Guangxi Zhuang Autonomous Region, Guangxi University, Nanning 530004, China.

Förderung

  • Guangxi Key Research and Development Program
  • 2021 Special funds for central guidance of local scientific and technological development funds
  • Specific Research Project of Guangxi for Research Bases and Talents
  • Guangxi University students innovative training program

Zitieren

APA

Huang, C., Yang, H., Xiong, Y., Jia, N., Nong, J., & Pan, L. (2025). Effect of Yb on Microstructure and Mechanical Properties of Al-Cu-Mn Heat-Resistant Aluminum Alloys. Materials, 18(5), 958. https://doi.org/10.3390/ma18050958

Vancouver

Huang C, Yang H, Xiong Y, Jia N, Nong J, Pan L. Effect of Yb on Microstructure and Mechanical Properties of Al-Cu-Mn Heat-Resistant Aluminum Alloys. Materials. 2025;18(5):958. doi:10.3390/ma18050958

BibTeX
@article{Huang2025,
  author = {Huang, Chifu and Yang, Hailong and Xiong, Yu and Jia, Nannan and Nong, Junhong and Pan, Liwen},
  title = {Effect of Yb on Microstructure and Mechanical Properties of Al-Cu-Mn Heat-Resistant Aluminum Alloys},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {5},
  pages = {958},
  doi = {10.3390/ma18050958}
}
Kostenlos starten →