EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyethylene Glycol Diacrylate Adapted Photopolymerization Material for Contact Lens with Improved Elastic Modulus Properties

Yamin Chen, Dianyang Li, Yougen Chen, Hui Fang iD

Materials · 13.02.2025 · 18 (4) · 827

DOI: 10.3390/ma18040827 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.02.2025. Verfasst von Yamin Chen und 3 weiteren Autor:innen. Beteiligte Einrichtung: Nanophotonics Research Center, Shenzhen Key Laboratory of Micro-Scale Optical Information Technology, Institute of Microscale Optoelectronics, Shenzh…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Scientific Instrument Developing Project of Shenzhen University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Four kinds of silicone hydrogel transparent contact lenses (CLs) with different formulations were prepared by the free radical photocuring polymerization. By mixing polyethylene glycol diacrylate (PEGDA) of 1000 Da with ethylene glycol dimethacrylate (EGDMA) and adding other silicone monomers and hydrophilic monomers, the transparency and flexibility of the material were successfully achieved. By optimizing the weight percentage of each component, the best balance of optical performance can be achieved. The photocuring properties of the materials were characterized by electronic universal test, double-beam UV-visible spectrophotometer, Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The results showed that the addition of higher PEGDA content reduces the elastic modulus, improves curing efficiency, improves equilibrium water content (EWC), and enhances light transmission. Hydrogels containing only high PEGDA but no EGDMA showed similar curing rates, water content, and elastic modulus, but had the worst optical transparency, far inferior to the materials mixed with PEGDA and EGDMA. Additionally, imaging performance of the CLs was further evaluated through simulation analysis using Ansys Zemax OpticStudio2024 software. This research provides a new choice of material consideration to improve the performance and wearing comfort of CLs.

Schlagwörter

Stichwörter der Autor:innen

PEGDAZemax simulationcontact lenselastic modulussilicone hydrogel material

Autor:innen und Institutionen

  • Nanophotonics Research Center, Shenzhen Key Laboratory of Micro-Scale Optical Information Technology, Institute of Microscale Optoelectronics, Shenzhen 518060, China.
  • Institute for Advanced Study, Shenzhen University, Shenzhen 518060, China.

ORCID-Profile: Hui Fang

Förderung

  • National Natural Science Foundation of China
  • Scientific Instrument Developing Project of Shenzhen University

Zitieren

APA

Chen, Y., Li, D., Chen, Y., & Fang, H. (2025). Polyethylene Glycol Diacrylate Adapted Photopolymerization Material for Contact Lens with Improved Elastic Modulus Properties. Materials, 18(4), 827. https://doi.org/10.3390/ma18040827

Vancouver

Chen Y, Li D, Chen Y, Fang H. Polyethylene Glycol Diacrylate Adapted Photopolymerization Material for Contact Lens with Improved Elastic Modulus Properties. Materials. 2025;18(4):827. doi:10.3390/ma18040827

BibTeX
@article{Chen2025,
  author = {Chen, Yamin and Li, Dianyang and Chen, Yougen and Fang, Hui},
  title = {Polyethylene Glycol Diacrylate Adapted Photopolymerization Material for Contact Lens with Improved Elastic Modulus Properties},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {827},
  doi = {10.3390/ma18040827}
}
Kostenlos starten →