The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene Terephthalate Glycol Multi-Material Structures Manufactured by Material Extrusion
3D Printing and Additive Manufacturing · 01.02.2024 · 11 (1) · 197-206
DOI: 10.1089/3dp.2021.0321 ↗Kurz gefasst
Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 15.02.2024. Verfasst von Emre Demir und 2 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Materials Engineering Department, Faculty of Engineering and Natural Sciences, Bursa Technical University, Bursa, Turkey. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
The mechanical properties of polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and PLA/PETG structures manufactured using the multi-material additive manufacturing (MMAM) method were studied in this work. Material extrusion additive manufacturing was used to print PLA/PETG samples with various PLA and PETG layer numbers. By varying the top and bottom layer numbers of two thermoplastics, the effect of layer number on the mechanical properties of 3D-printed structures was investigated. The chemical and thermal characteristics of PLA and PETG were investigated using Fourier transform infrared spectroscopy and differential scanning calorimetry. Tensile and flexural strength of 3D-printed PLA, PETG, and PLA/PETG samples were determined using tensile and three-point bending tests. The fracture surfaces of the samples were evaluated using optical microscopy. The results indicated that multi-material part containing 13 layers of PLA and 3 layers of PETG exhibited the highest ultimate tensile strength (65.4 MPa) and a good flexural strength (91.4 MPa). MMAM was discovered to be a viable way for producing PLA/PETG materials with great mechanical performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer Materials Engineering Department, Faculty of Engineering and Natural Sciences, Bursa Technical University, Bursa, Turkey.
ORCID-Profile: İnal Kaan Duygun
Zitieren
APA
Demir, E., Duygun, İ. K., & Bedeloğlu, A. (2024). The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene Terephthalate Glycol Multi-Material Structures Manufactured by Material Extrusion. 3D Printing and Additive Manufacturing, 11(1), 197-206. https://doi.org/10.1089/3dp.2021.0321
Vancouver
Demir E, Duygun İK, Bedeloğlu A. The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene Terephthalate Glycol Multi-Material Structures Manufactured by Material Extrusion. 3D Printing and Additive Manufacturing. 2024;11(1):197-206. doi:10.1089/3dp.2021.0321
BibTeX
@article{Demir2024,
author = {Demir, Emre and Duygun, İnal Kaan and Bedeloğlu, Ayşe},
title = {The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene Terephthalate Glycol Multi-Material Structures Manufactured by Material Extrusion},
journal = {3D Printing and Additive Manufacturing},
year = {2024},
volume = {11},
number = {1},
pages = {197--206},
doi = {10.1089/3dp.2021.0321}
}
EUVIMED