EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Integrity in the Grinding of Hardened AISI D2 Steel

Tao Zhang iD, Qianting Wang, Ningchang Wang, Lan Yan, Feng Jiang iD, Enlai Zhang, Wuhui Zhou, Hao Gao, Yong Wang

Materials · 13.02.2025 · 18 (4) · 814

DOI: 10.3390/ma18040814 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.02.2025. Verfasst von Tao Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen 361021, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xiamen University of Technology, Postdoctoral Foundation of Zhejiang province, Science and Technology Project for High-level Talents of XMUT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The surface integrity of grinding has a significant influence on the service performance and life of machined parts. In this study, the influence of grinding parameters and the grit size of the grinding wheel on the surface integrity of the hardened steel, including the roughness, microstructure, and hardness of the subsurface and the residual stress of the ground surface, was comprehensively investigated, and the corresponding mechanisms were revealed. The results show that the roughness perpendicular to the grinding direction was significantly larger than that parallel to the grinding direction due to serious side flow, and increasing the grinding speed or reducing the grinding depth was beneficial for reducing the side flow and thus decreasing the roughness. It was found that the grinding temperature dominated the formation of a harder white layer and a softer black layer, and workpiece speed had the smallest effect on the transition of subsurface microstructure compared to grinding speed and depth. It was also found that the increase in workpiece speed, grinding depth, or grinding speed resulted in a transition from compressive to tensile residual stress or an increase in tensile residual stress, and that grinding wheels with finer grit tended to induce compressive residual stress. This study may help to improve surface integrity by optimizing grinding parameters or facilitating the selection of the optimal grinding wheel.

Schlagwörter

Stichwörter der Autor:innen

hardnessresidual stressroughnesssubsurface microstructuresurface integrity

Autor:innen und Institutionen

  • College of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen 361021, China.
  • SINOMACH Intelligence Technology Co., Ltd., Guangzhou 510670, China.
  • State Key Laboratory of High-Performance Tools, Zhengzhou Research Institute for Abrasives & Grinding Co., Ltd., Zhengzhou 450001, China.
  • College of Mechanical Engineering and Automation, National Huaqiao University, Xiamen 361021, China.
  • ZYNP Corporation, Mengzhou 454750, China.
  • School of Mechanical and Electrical Engineering, Sanming University, Sanming 365004, China.

ORCID-Profile: Tao Zhang, Feng Jiang

Förderung

  • Xiamen University of Technology
  • Postdoctoral Foundation of Zhejiang province
  • Science and Technology Project for High-level Talents of XMUT

Zitieren

APA

Zhang, T., Wang, Q., Wang, N., Yan, L., Jiang, F., Zhang, E., Zhou, W., Gao, H., & Wang, Y. (2025). Surface Integrity in the Grinding of Hardened AISI D2 Steel. Materials, 18(4), 814. https://doi.org/10.3390/ma18040814

Vancouver

Zhang T, Wang Q, Wang N, Yan L, Jiang F, Zhang E, et al. Surface Integrity in the Grinding of Hardened AISI D2 Steel. Materials. 2025;18(4):814. doi:10.3390/ma18040814

BibTeX
@article{Zhang2025,
  author = {Zhang, Tao and Wang, Qianting and Wang, Ningchang and Yan, Lan and Jiang, Feng and Zhang, Enlai and Zhou, Wuhui and Gao, Hao and Wang, Yong},
  title = {Surface Integrity in the Grinding of Hardened AISI D2 Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {814},
  doi = {10.3390/ma18040814}
}
Kostenlos starten →