EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Custom Microalgae-Based Bioink Formulations for Optimized Green Bioprinting

Olubusuyi Ayowole iD, Justin Lapp iD, Bashir Khoda

Materials · 08.02.2025 · 18 (4) · 753

DOI: 10.3390/ma18040753 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.02.2025. Verfasst von Olubusuyi Ayowole und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Maine, Orono, ME 04469, USA. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Green bioprinting, from the context of merging 3D bioprinting with microalgae cell organization, holds promise for industrial-scale optimization. This study employs spectrophotometric analysis to explore post-bioprinting cell growth density variation within hybrid hydrogel biomaterial scaffolds. Three hydrogel biomaterials—Alginic acid sodium salt (ALGINATE), Nanofibrillated Cellulose (NFC)—TEMPO, and CarboxyMethyl Cellulose (CMC)—are chosen for their scaffolding capabilities. Bioink development and analysis of their impact on cell proliferation and morphology are conducted. Chlorella microalgae cell growth within hydrogel compositions is probed using absorbance measurements, with additional assessment of shear thinning properties. Notably, NFC exhibits reduced shear thinning compared to CMC. Results reveal that while mono-hydrogel substrates with pronounced adhesion inhibit Chlorella cell proliferation, alginate fosters increased cell concentration alongside a slight viscosity rise.

Schlagwörter

Stichwörter der Autor:innen

absorbancebioinkbioprintinghydrogelmicroalgae

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Maine, Orono, ME 04469, USA.

ORCID-Profile: Olubusuyi Ayowole, Justin Lapp

Zitieren

APA

Ayowole, O., Lapp, J., & Khoda, B. (2025). Evaluation of Custom Microalgae-Based Bioink Formulations for Optimized Green Bioprinting. Materials, 18(4), 753. https://doi.org/10.3390/ma18040753

Vancouver

Ayowole O, Lapp J, Khoda B. Evaluation of Custom Microalgae-Based Bioink Formulations for Optimized Green Bioprinting. Materials. 2025;18(4):753. doi:10.3390/ma18040753

BibTeX
@article{Ayowole2025,
  author = {Ayowole, Olubusuyi and Lapp, Justin and Khoda, Bashir},
  title = {Evaluation of Custom Microalgae-Based Bioink Formulations for Optimized Green Bioprinting},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {753},
  doi = {10.3390/ma18040753}
}
Kostenlos starten →