EUVIMEDEUVIMED entdecken
Open Access

Data-Driven Optimization of Bioink Formulations for Extrusion-Based Bioprinting: A Predictive Modeling Approach

Rokeya Sarah, Riley Rohauer, Kory Schimmelpfennig, Shah M Limon, Christopher L Lewis, Ahasan Habib

Journal of Manufacturing Science and Engineering · 01.10.2025 · 147 (10)

DOI: 10.1115/1.4069041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 16.07.2025. Verfasst von Rokeya Sarah und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Sustainable Product Design and Architecture, Keene State College, 229 Main Street, Keene, NH 03435. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The field of tissue engineering has significantly advanced with the development of extrusion-based bioprinting. This technique utilizes shear forces to generate filaments for fabricating intricate structures. The printability and structural integrity of bioprinted constructs rely heavily on the rheological properties of bioinks, particularly viscosity, which varies with the shear rate for non-Newtonian materials. Since the shear rate at the nozzle tip fluctuates during extrusion, it is essential to understand how bioink composition influences this behavior. This study investigates the rheological behavior of ALGEC bioinks, a novel formulation composed of ALginate, GElatin, and 2,2,6,6-Tetramethylpiperidine 1-oxyl (TEMPO)-oxidized nanofibrillated cellulose (TO-NFC). The bioinks were prepared with varying concentrations: alginate (0–5.25%), gelatin (0–5.25%), and TO-NFC (0–1.5%), with a maximum total solid content of 8%. Viscosity was conducted over shear rates ranging from 0.1 to 100 s−1, with 252 viscosity data points used 80% for training and 20% for validation. To predict viscosity, polynomial fit and interaction-based multiple regression models were developed. Experimental data were used to estimate viscosity based on bioink composition and shear rate, with the best-performing model achieving an R2 of 0.98 and an mean absolute error (MAE) of 0.12. These predictive models were further utilized to optimize ALGEC formulations to achieve targeted viscosity ranges. Constructs were bioprinted using a random and an optimized composition, demonstrating the effectiveness of model-driven bioink optimization. These findings enhance tissue engineering by improving bioink printability, leading to structurally stable bioprinted constructs for regenerative medicine applications.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingCAD/CAM/CAEadditive manufacturingadvanced materials and processingbiomedical manufacturinghydrogelmachine learningmultiple regressionpolynomial fitprint-parametersrapid prototyping and solid freeform fabrication

Autor:innen und Institutionen

  • Department of Sustainable Product Design and Architecture, Keene State College, 229 Main Street, Keene, NH 03435.
  • Department of Biomedical Engineering, Rochester Institute of Technology, 70 Lomb Memorial Drive, Rochester, NY 14623.
  • Department of Manufacturing and Mechanical Engineering Technology, Rochester Institute of Technology, 70 Lomb Memorial Drive, Rochester, NY 14623.
  • Department of Engineering, Slippery Rock University, 104 E Vincent Science Center, Slippery Rock, PA 16075.

Zitieren

APA

Sarah, R., Rohauer, R., Schimmelpfennig, K., Limon, S. M., Lewis, C. L., & Habib, A. (2025). Data-Driven Optimization of Bioink Formulations for Extrusion-Based Bioprinting: A Predictive Modeling Approach. Journal of Manufacturing Science and Engineering, 147(10). https://doi.org/10.1115/1.4069041

Vancouver

Sarah R, Rohauer R, Schimmelpfennig K, Limon SM, Lewis CL, Habib A. Data-Driven Optimization of Bioink Formulations for Extrusion-Based Bioprinting: A Predictive Modeling Approach. Journal of Manufacturing Science and Engineering. 2025;147(10). doi:10.1115/1.4069041

BibTeX
@article{Sarah2025,
  author = {Sarah, Rokeya and Rohauer, Riley and Schimmelpfennig, Kory and Limon, Shah M and Lewis, Christopher L and Habib, Ahasan},
  title = {Data-Driven Optimization of Bioink Formulations for Extrusion-Based Bioprinting: A Predictive Modeling Approach},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2025},
  volume = {147},
  number = {10},
  doi = {10.1115/1.4069041}
}
Kostenlos starten →