EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Dilution on Microstructure and Phase Transformation of AlCrFeMnNi High-Entropy Alloy by Resonant Ultrasonic Vibration-Assisted Laser Cladding

Aziz Ul Hassan Mohsan iD, Mina Zhang, Menggang Zhai, Yishen Wang, Mudaser Ullah, Xuedao Shu iD, Su Zhao

Materials · 05.02.2025 · 18 (3) · 695

DOI: 10.3390/ma18030695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.02.2025. Verfasst von Aziz Ul Hassan Mohsan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Science and Technology Innovation 2025" Major Special Project, Foundation of Director of Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Natural Science Foundation of Ningbo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study effectively produced a high-entropy alloy (HEA) coating of AlCrFeMnNi on AISI 304L steel using resonant ultrasonic vibration-assisted laser cladding (R-UVALC). An investigation was conducted to examine the impact of dilution rate on the phase composition, microstructure, and mechanical and tribological properties of AlCrFeMnNi coatings. The coating, which was created utilizing the appropriate dilution rate, was thoroughly characterized using EDS mapping and TEM investigation. The results suggest that a higher dilution rate causes a change in the AlCrFeMnNi coating, transforming it from a single solid solution phase (BCC) into a two-phase solid solution containing both FCC and BCC phases. The analysis conducted using transmission electron microscopy (TEM) reveals that the AlCrFeMnNi coating, when diluted at an optimal rate of around 37%, is predominantly composed of a disordered body-centered cubic (BCC) phase and an ordered BCC (B2) phase featuring a spinodal decomposition structure. The AlCrFeMnNi coating has an average microhardness of approximately 540 HV, which is over 2.5 times higher than the microhardness of the substrate. Additionally, it was also established that the dilution rate has an impact on the occurrence of phases, which subsequently affects the mechanical and antifrictional properties of the coating. The integration of ultrasonic vibration in laser cladding enhances quality and improves mechanical and tribological properties, thereby reducing material costs and promoting an environmentally friendly process when compared to conventional cladding.

Schlagwörter

Stichwörter der Autor:innen

dilutionmechanical propertiesmicrostructuretribologyultrasonic vibration-assisted laser cladding (UVALC)

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China.
  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
  • Department of Mechanical Engineering, Technological University Dublin, D01 K822 Dublin, Ireland.

ORCID-Profile: Aziz Ul Hassan Mohsan, Xuedao Shu

Förderung

  • Ningbo Science and Technology Innovation 2025" Major Special Project
  • Foundation of Director of Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences
  • Natural Science Foundation of Ningbo
  • China Postdoctoral Science Foundation
  • Pioneer" and "Leading Goose" R&D Program of Zhejiang
  • “Ningbo Science and Technology Innovation 2025” Major Special Project
  • “Pioneer” and “Leading Goose” R&D Program of Zhejiang

Zitieren

APA

Mohsan, A. U. H., Zhang, M., Zhai, M., Wang, Y., Ullah, M., Shu, X., & Zhao, S. (2025). Effect of Dilution on Microstructure and Phase Transformation of AlCrFeMnNi High-Entropy Alloy by Resonant Ultrasonic Vibration-Assisted Laser Cladding. Materials, 18(3), 695. https://doi.org/10.3390/ma18030695

Vancouver

Mohsan AUH, Zhang M, Zhai M, Wang Y, Ullah M, Shu X, et al. Effect of Dilution on Microstructure and Phase Transformation of AlCrFeMnNi High-Entropy Alloy by Resonant Ultrasonic Vibration-Assisted Laser Cladding. Materials. 2025;18(3):695. doi:10.3390/ma18030695

BibTeX
@article{Mohsan2025,
  author = {Mohsan, Aziz Ul Hassan and Zhang, Mina and Zhai, Menggang and Wang, Yishen and Ullah, Mudaser and Shu, Xuedao and Zhao, Su},
  title = {Effect of Dilution on Microstructure and Phase Transformation of AlCrFeMnNi High-Entropy Alloy by Resonant Ultrasonic Vibration-Assisted Laser Cladding},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {695},
  doi = {10.3390/ma18030695}
}
Kostenlos starten →