Design and Effect of Resonant Ultrasonic Vibration-Assisted Laser Cladding (R-UVALC) on AlCrFeMnNi High-Entropy Alloy
Materials · 20.02.2024 · 17 (5) · 969
DOI: 10.3390/ma17050969 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.02.2024. Verfasst von Aziz Ul Hassan Mohsan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Science and Technology Innovation 2025, Pioneer" and "Leading Goose" R&D Program of Zhejiang, Foundation of Director of Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences.
Abstract (Originalsprache)
The design of the resonant ultrasonic vibration-assisted laser cladding (R-UVALC) setup involved employing finite element analysis (FEA) to simulate the ultrasonic transducer, horn, and workpiece in a resonance state. The impact of R-UVALC on AlCrFeMnNi high-entropy alloys was assessed using various ultrasonic vibration amplitudes of 0, 5, 10, and 15 µm, with a constant frequency of 20 kHz. Ultrasonic vibrations reduced pores and cracks and increased the clad breadth, melt pool wetting angle, and laser-clad layer consistency. The columnar elongated grains in proximity to the substrate surface underwent a size reduction and transformed into grains with a more equiaxed shape with the utilization of ultrasonic vibrations at an amplitude of 5 µm. Laser cladding performed without ultrasonic vibrations yields two phases: face-centered cubic (FCC) and body-centered cubic (BCC). However, when the coating is exposed to ultrasonic vibrations with an amplitude of 5 µm, it forms a solitary body-centered cubic (BCC) phase. The microhardness tripled compared to the substrate, and the most significant microhardness value was achieved at 5 µm of ultrasonic vibration. The friction coefficient was assessed at an ambient temperature, revealing that an ultrasonic amplitude yields the lowest friction coefficient, demonstrating the excellent wear resistance properties of the coating. The analysis of the 3D surface profile of the wear indicates that the use of ultrasonic aid with a 5 µm amplitude leads to reduced depth of scars, and the primary wear mechanism observed is abrasive and oxidative wear with fewer grooves and debris. In addition, XPS analysis revealed the presence of metal components in an oxidized condition, suggesting that the wear process is oxidative in nature. Integrating the R-UVALC setup into a resonance state can significantly enhance the efficiency of the laser cladding process in the laser cladding field.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
- International College, University of Chinese Academy of Sciences, Beijing 101408, China.
- Ningbo Branch of Chinese Academy of Ordnance Science, Ningbo 315103, China.
ORCID-Profile: Aziz Ul Hassan Mohsan, Jiahao Zhang, Yanyuan Zhou
Förderung
- Ningbo Science and Technology Innovation 2025
- Pioneer" and "Leading Goose" R&D Program of Zhejiang
- Foundation of Director of Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences
- Natural Science Foundation of Inner Mongolia
- Natural Science Foundation of Ningbo
- China Postdoctoral Science Foundation
- Chinese Academy of Sciences (CAS) and The World Academy of Sciences (TWAS)
- the “Ningbo Science and Technology Innovation 2025” Major Special Project
Zitieren
APA
Mohsan, A. U. H., Zhang, M., Wang, D., Wang, Y., Zhang, J., Zhou, Y., Li, Y., & Zhao, S. (2024). Design and Effect of Resonant Ultrasonic Vibration-Assisted Laser Cladding (R-UVALC) on AlCrFeMnNi High-Entropy Alloy. Materials, 17(5), 969. https://doi.org/10.3390/ma17050969
Vancouver
Mohsan AUH, Zhang M, Wang D, Wang Y, Zhang J, Zhou Y, et al. Design and Effect of Resonant Ultrasonic Vibration-Assisted Laser Cladding (R-UVALC) on AlCrFeMnNi High-Entropy Alloy. Materials. 2024;17(5):969. doi:10.3390/ma17050969
BibTeX
@article{Mohsan2024,
author = {Mohsan, Aziz Ul Hassan and Zhang, Mina and Wang, Dafeng and Wang, Yishen and Zhang, Jiahao and Zhou, Yanyuan and Li, Yifei and Zhao, Su},
title = {Design and Effect of Resonant Ultrasonic Vibration-Assisted Laser Cladding (R-UVALC) on AlCrFeMnNi High-Entropy Alloy},
journal = {Materials},
year = {2024},
volume = {17},
number = {5},
pages = {969},
doi = {10.3390/ma17050969}
}
EUVIMED