EUVIMEDEUVIMED entdecken
Crossref

Effects of build orientation on the mechanical and surface properties of polyetheretherketone fabricated with fused deposition modeling

Roubing Ha, Tamaki Hada, Chun Wei Chang, Yumika Soeda, Motohiro Uo, Manabu Kanazawa

Journal of Prosthodontic Research · 2026 · 70 (4) · 604-610

DOI: 10.2186/jpr.jpr_d_25_00179 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2026. Verfasst von Roubing Ha und 5 weiteren Autor:innen. Beteiligte Einrichtung: Digital Dentistry, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan. Hauptthemen laut MEDLINE: Polyethylene Glycols, Polyether Compounds, Ketones, Materials Testing. Die Arbeit nennt 37 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: This study evaluated the effects of build orientation on the mechanical and surface properties of polyetheretherketone (PEEK) fabricated using fused deposition modeling (FDM). METHODS: Rectangular and six disc-shaped specimens were fabricated in three build orientations (0, 45, and 90°) using an FDM printer with a PEEK filament (PP) (n = 6 per group). Three-point bending tests were conducted on the rectangular specimens to assess the flexural strength (FS) and flexural modulus (FM), whereas Vickers hardness (HV) and surface roughness (Ra) tests were performed on the disc specimens. A scanning electron microscope (SEM) was employed to observe the cross-section of the deformed and undeformed parts of the rectangular specimen after a three-point bending test. The mean FS, FM, HV, and Ra of PP were analyzed using a one-way analysis of variance. Tukey's multiple comparison test was also performed (α = 0.05). RESULTS: The 90° PP had the highest FS and FM, followed by the 45° PP; the 0° PP had the lowest FS and FM. The surface of the 0° PP had no connecting surfaces between the layers, suggesting that its HV was the highest for the PP groups. For the 45° PP, the surface roughness may have increased because of the addition of a support structure to the specimen. CONCLUSIONS: Build orientation affects the mechanical and surface properties of the FDM-fabricated PEEK. Overall, the 90° PP demonstrated the most reasonable build orientation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polyethylene GlycolsPolyether CompoundsKetonesMaterials TestingPrinting, Three-DimensionalBenzophenonesSurface PropertiesMicroscopy, Electron, ScanningFlexural StrengthHardnessPolymers

Stichwörter der Autor:innen

3D-printedBuild orientationFused deposition modelingPolyetheretherketone

Substanzen

Polyethylene GlycolsPolyether CompoundsKetonesBenzophenonespolyetheretherketonePolymers

Autor:innen und Institutionen

  • Digital Dentistry, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
  • Advanced biomaterials, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
  • Oral Devices and Materials, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
  • Oral Science Center, Institute of Science Tokyo, Tokyo, Japan.
  • Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
  • University of Zurich, Zurich, Switzerland.

Zitieren

APA

Ha, R., Hada, T., Chang, C. W., Soeda, Y., Uo, M., & Kanazawa, M. (2026). Effects of build orientation on the mechanical and surface properties of polyetheretherketone fabricated with fused deposition modeling. Journal of Prosthodontic Research, 70(4), 604-610. https://doi.org/10.2186/jpr.jpr_d_25_00179

Vancouver

Ha R, Hada T, Chang CW, Soeda Y, Uo M, Kanazawa M. Effects of build orientation on the mechanical and surface properties of polyetheretherketone fabricated with fused deposition modeling. Journal of Prosthodontic Research. 2026;70(4):604-610. doi:10.2186/jpr.jpr_d_25_00179

BibTeX
@article{Ha2026,
  author = {Ha, Roubing and Hada, Tamaki and Chang, Chun Wei and Soeda, Yumika and Uo, Motohiro and Kanazawa, Manabu},
  title = {Effects of build orientation on the mechanical and surface properties of polyetheretherketone fabricated with fused deposition modeling},
  journal = {Journal of Prosthodontic Research},
  year = {2026},
  volume = {70},
  number = {4},
  pages = {604--610},
  doi = {10.2186/jpr.jpr_d_25_00179}
}
Kostenlos starten →