EUVIMEDObjevte EUVIMED
ÜbersichtsarbeitOpen access · CC BY 4.0

Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade

Tibor Kvackaj, Jana Bidulská iD, Alica Fedoríková, Róbert Bidulský iD

Materials · 2025-01-22 · 18 (3) · 499

DOI: 10.3390/ma18030499 ↗

At a glance

Übersichtsarbeit in Materials, published online on 2025-01-22. Written by Tibor Kvackaj and 3 co-authors. Institution: Bodva Industry and Innovation Cluster, Budulov 174, 04501 Moldava nad Bodvou, Slovakia. Cited 20 times so far (Crossref); 106 references. The full text is freely available (open access, CC BY 4.0). Funded by: EU Next Generation EU through the Recovery and Resilience Plan for Slovakia, EU Next Generation EU.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

The main goal of this contribution is to evaluate the mechanical properties, strengthening contributions and microstructure development of austenitic stainless steel AISI 316 LN with high nitrogen content in the states characterized as the initial state and the states after rolling with different thickness deformations. The initial state was represented by solution annealing (777 K/60 min). The deformation state was characterized by rolling thickness reductions carried out at ambient temperature (TA = 295 K) with deformations in the range ε ∈ (0; 50> [%]. Studies of microstructures, mechanical properties and strengthening contributions before and after rolling were carried out. The initial state after solution annealing was as follows: offset yield strength Rp0.2 = 325 MPa, elongation A5 = 49% and diameter of grain size d = 214 μm. The state after ambient rolling with thickness deformation ε = 50% was as follows: Rp0.2 = 994 MPa, A5 = 4% and d = 64 μm. The maximum contribution to strengthening after rolling processing with 50% thickness deformation was dislocations (∆ R P0.2_DS = 560 MPa) followed by twins (∆ R P0.2_DT =140 MPa).

Subjects

Author keywords

AISI 316 LNambient rollingmechanical propertiesstrengthening contributions

Authors and institutions

  • Bodva Industry and Innovation Cluster, Budulov 174, 04501 Moldava nad Bodvou, Slovakia.
  • Institute of Materials, Faculty of Materials, Metallurgy and Recycling, Technical University of Košice, Letná 9, 04200 Košice, Slovakia.
  • Department of Material Analysis, Research Centre Řež, Hlavní 130, 25068 Husinec, Czech Republic.
  • Advanced Research and Innovation Hub, Budulov 174, 04501 Moldava nad Bodvou, Slovakia.

ORCID profiles: Jana Bidulská, Róbert Bidulský

Funding

  • EU Next Generation EU through the Recovery and Resilience Plan for Slovakia
  • EU Next Generation EU

Cite

APA

Kvackaj, T., Bidulská, J., Fedoríková, A., & Bidulský, R. (2025). Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade. Materials, 18(3), 499. https://doi.org/10.3390/ma18030499

Vancouver

Kvackaj T, Bidulská J, Fedoríková A, Bidulský R. Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade. Materials. 2025;18(3):499. doi:10.3390/ma18030499

BibTeX
@article{Kvackaj2025,
  author = {Kvackaj, Tibor and Bidulská, Jana and Fedoríková, Alica and Bidulský, Róbert},
  title = {Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {499},
  doi = {10.3390/ma18030499}
}
Start for free →