EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Cell Structure in LPBF 316L—Microstructural Heterogeneity, Thermal Stability, and Mechanical Properties

Jayant Barode iD, Marco Brander, Tianbo Yu iD, Venkata Karthik Nadimpalli, Dorte Juul Jensen, Xiaobo Wang iD

Materials · 2025-01-21 · 18 (3) · 475

DOI: 10.3390/ma18030475 ↗

At a glance

Journal article in Materials, published online on 2025-01-21. Written by Jayant Barode and 5 co-authors. Institution: Department of Civil and Mechanical Engineering, Technical University of Denmark, 2800 Kongens Lyngby, Denmark. Cited 24 times so far (Crossref); 33 references. The full text is freely available (open access, CC BY 4.0). Funded by: Villum Fonden, Independent Research Fund Denmark DFF–FTP.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The microstructure of additively manufactured 316L stainless steel is hierarchical, and on a fine scale, it contains cell structures and dislocations. These microstructures define the mechanical properties, and it is thus of importance to quantify them and understand their thermal stability. This study investigates the heterogeneity of the microstructure in laser powder bed-fused 316L with a focus on variations in the cell and dislocation structures through the sample thickness along the build direction. While at the coarse scale the microstructure is rather homogeneous throughout its thickness, there are significant variations in the dislocation network, highlighting a higher dislocation density near the bottom layers than near the top. Furthermore, post-processing heat treatment at 500 °C and 800 °C reveals different stabilities of the cell structures, with significant cell dissolution at 800 °C, particularly at the top of the build. Microhardness measurements corroborate these findings, showing higher hardness in the bottom layers across all conditions, e.g., an increase in hardness from 225 HV to 236 HV is observed in the as-built condition. These results underpin the suggestion that significant microstructural heterogeneity may exist through the thickness in as-built parts, which affects the mechanical properties and subsequent heat treatments.

Subjects

Author keywords

316L stainless steelcell structuredislocation densityelectron microscopylaser powder bed fusionmicrostructural heterogeneitythermal stability

Authors and institutions

  • Department of Civil and Mechanical Engineering, Technical University of Denmark, 2800 Kongens Lyngby, Denmark.

ORCID profiles: Jayant Barode, Tianbo Yu, Xiaobo Wang

Funding

  • Villum Fonden
  • Independent Research Fund Denmark DFF–FTP

Cite

APA

Barode, J., Brander, M., Yu, T., Nadimpalli, V. K., Jensen, D. J., & Wang, X. (2025). Cell Structure in LPBF 316L—Microstructural Heterogeneity, Thermal Stability, and Mechanical Properties. Materials, 18(3), 475. https://doi.org/10.3390/ma18030475

Vancouver

Barode J, Brander M, Yu T, Nadimpalli VK, Jensen DJ, Wang X. Cell Structure in LPBF 316L—Microstructural Heterogeneity, Thermal Stability, and Mechanical Properties. Materials. 2025;18(3):475. doi:10.3390/ma18030475

BibTeX
@article{Barode2025,
  author = {Barode, Jayant and Brander, Marco and Yu, Tianbo and Nadimpalli, Venkata Karthik and Jensen, Dorte Juul and Wang, Xiaobo},
  title = {Cell Structure in LPBF 316L—Microstructural Heterogeneity, Thermal Stability, and Mechanical Properties},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {475},
  doi = {10.3390/ma18030475}
}
Start for free →