Crystal and Dislocation Characteristics of Ti-6Al-4V Alloy Under Effect of Laser Shock Peening
Materials · 15.01.2025 · 18 (2) · 378
DOI: 10.3390/ma18020378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.01.2025. Verfasst von Cheng Gu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Chongqing University, Chongqing 400045, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Chongqing, China, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Laser shock peening (LSP) is an effective method for enhancing the fatigue life and mechanical properties of Ti alloys. However, there is limited research on the effects of LSP on crystal structure and dislocation characteristics. In this study, Ti-6Al-4V alloy was subjected to laser shock peening with varying laser power levels. The influence of laser power on the microstructure of Ti-6Al-4V was investigated, with a focus on the evolution of the cross-sectional structure, crystallographic features, and dislocation behavior. These characteristics were analyzed using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Following laser shock peening, the surface grains of Ti-6Al-4V alloy exhibited a distinct preferred orientation and underwent significant refinement, resulting in the formation of nanocrystals. At a laser power of 8 J, the texture strength decreased to 5.19 mud. As laser power increased, a denser dislocation structure and high-density dislocation regions formed at the surface, and the subgrain size further decreased, reaching 66 nm at 8 J. These findings provide valuable insights into grain refinement and property enhancement, contributing to the understanding of process–microstructure–property relationships.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Chongqing University, Chongqing 400045, China.
- National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044, China.
- National Key Laboratory of Advanced Casting Technologies, Chongqing University, Chongqing 400044, China.
- Henan Zhongyuan Special Steel Equipment Manufacturing Co., Ltd., Jiyuan 459099, China.
ORCID-Profile: Cheng Gu, Yajun Wang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Chongqing, China
- China Postdoctoral Science Foundation
Zitieren
APA
Gu, C., Wang, C., Zhao, J., Wang, Y., & Tian, Z. (2025). Crystal and Dislocation Characteristics of Ti-6Al-4V Alloy Under Effect of Laser Shock Peening. Materials, 18(2), 378. https://doi.org/10.3390/ma18020378
Vancouver
Gu C, Wang C, Zhao J, Wang Y, Tian Z. Crystal and Dislocation Characteristics of Ti-6Al-4V Alloy Under Effect of Laser Shock Peening. Materials. 2025;18(2):378. doi:10.3390/ma18020378
BibTeX
@article{Gu2025,
author = {Gu, Cheng and Wang, Chun and Zhao, Jianhua and Wang, Yajun and Tian, Zenghui},
title = {Crystal and Dislocation Characteristics of Ti-6Al-4V Alloy Under Effect of Laser Shock Peening},
journal = {Materials},
year = {2025},
volume = {18},
number = {2},
pages = {378},
doi = {10.3390/ma18020378}
}
EUVIMED