Effect of Cold Deformation on the Microstructural and Property Uniformity of Al2O3/Cu Composites
Materials · 31.12.2024 · 18 (1) · 125
DOI: 10.3390/ma18010125 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.12.2024. Verfasst von Song Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key-Area Research and Development Program of Guangdong Province, High-level Talent Research Start-up Project Funding of Henan Academy of Sciences, the 14th Five-Year Plan.
Abstract (Originalsprache)
Copper matrix composites (Cu-MCs) have garnered significant attention due to their exceptional electrical, wear-resistant, and mechanical properties. Among them, Al2O3/Cu composites, reinforced with Al2O3, are a focal point in the field of high-strength, high-conductivity copper alloys, owing to their high strength, excellent electrical conductivity, and superior resistance to high-temperature softening. Cold deformation is an effective method for enhancing the mechanical properties of Al2O3/Cu composites. However, during cold deformation of large-cross-sectional Al2O3/Cu composites, the inhomogeneity in microstructure and properties induced by varying stress states cannot be overlooked. In this study, cold deformation of 1.12 wt% Al2O3/Cu large-cross-sectional composites was performed using a rolling process, coupled with finite element numerical simulations, to investigate the distribution characteristics of microstructure and properties during the rolling process. The results indicate that under cold deformation, the hardness of the material increases linearly from the surface layer to the core, while the change in electrical conductivity is minimal. The increase in hardness is closely related to variations in dislocation density and grain size, with dislocation density being the dominant strengthening mechanism. Quantitative analysis reveals that strain inhomogeneity during cold deformation is the primary cause of microstructural differences, leading to variations in mechanical properties at different positions. This study provides a theoretical basis for understanding the inhomogeneity of cold deformation in large-sized Al2O3/Cu composites and for controlling their microstructure–property relationships.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China.
- School of Mechanical and Aeronautical Manufacturing Engineering, Anyang Institute of Technology, Anyang 455000, China.
- Collaborative Innovation Center of Nonferrous Metals, Luoyang 471023, China.
- Key Laboratory of Materials Science and Processing Technology for Non-Ferrous Metals of Henan, Luoyang 471023, China.
- Henan Academy of Sciences, Zhengzhou 450002, China.
- Henan Provincial Key Laboratory of Advanced Conductor Materials, Zhengzhou 450046, China.
Förderung
- Key-Area Research and Development Program of Guangdong Province
- High-level Talent Research Start-up Project Funding of Henan Academy of Sciences
- the 14th Five-Year Plan
- National Natural Science Foundation of China (NSFC)
- 14th Five-Year Plan
Zitieren
APA
Liu, S., Li, S., Song, K., Guo, X., Song, H., Qi, K., & Chen, F. (2024). Effect of Cold Deformation on the Microstructural and Property Uniformity of Al2O3/Cu Composites. Materials, 18(1), 125. https://doi.org/10.3390/ma18010125
Vancouver
Liu S, Li S, Song K, Guo X, Song H, Qi K, et al. Effect of Cold Deformation on the Microstructural and Property Uniformity of Al2O3/Cu Composites. Materials. 2024;18(1):125. doi:10.3390/ma18010125
BibTeX
@article{Liu2024,
author = {Liu, Song and Li, Shaolin and Song, Kexing and Guo, Xiuhua and Song, Hao and Qi, Keke and Chen, Fuxiao},
title = {Effect of Cold Deformation on the Microstructural and Property Uniformity of Al2O3/Cu Composites},
journal = {Materials},
year = {2024},
volume = {18},
number = {1},
pages = {125},
doi = {10.3390/ma18010125}
}
EUVIMED