EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Mid-Term Strength and Microstructure of Fly Ash–Cement Paste Backfill with Silica Fume for Continuous Mining and Backfilling Operations

Xiaoping Shao, Zhengchun Wang, Renlong Tang, Bingchao Zhao, Jianbo Ning, Chuang Tian, Wei Wang, Yibo Zhang, Xing Du

Materials · 10.12.2024 · 17 (24) · 6037

DOI: 10.3390/ma17246037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.12.2024. Verfasst von Xiaoping Shao und 8 weiteren Autor:innen. Beteiligte Einrichtung: Energy School, Xi'an University of Science and Technology, Xi'an 710054, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fly ash–cement composite backfill slurry, prepared by partially replacing cement with fly ash, has been demonstrated to effectively reduce the mine backfill costs and carbon emissions associated with cement production. However, the use of fly ash often results in insufficient early and medium-term strength of the backfill material. To address the demand for high medium-term strength in backfill materials under continuous mining and backfilling conditions, this study developed a silica fume–fly ash–cement composite backfill slurry. The effects of varying silica fume contents on the slurry’s flowability, uniaxial compressive strength, microstructure, and pore characteristics were systematically investigated. The results showed that increasing the silica fume content significantly reduced the slurry’s flowability. However, at a silica fume content of 5%, the slurry achieved optimal medium-term strength, with a 14-day uniaxial compressive strength of 3.98 MPa, representing a 25% improvement compared to the control group. A microstructural analysis revealed that a moderate silica fume content promoted the formation of calcium silicate hydrate gel, filled micropores, and optimized the pore structure, thereby enhancing the overall strength and durability of the material. Conversely, an excessive silica fume content above 5% led to a marked decrease in both flowability and strength. Based on a comprehensive evaluation of silica fume’s effects on the flowability, strength, and microstructure, the optimal silica fume content was determined to be 5%. This study provides a theoretical basis and practical guidance for improving the efficiency of continuous mining and backfilling operations, and for designing high-performance backfill materials suitable for continuous mining and filling conditions.

Schlagwörter

Stichwörter der Autor:innen

continuous mining and continuous backfillingfly ash–cement paste filling materialmechanical propertiesmicrostructuresilica fume

Autor:innen und Institutionen

  • Energy School, Xi'an University of Science and Technology, Xi'an 710054, China.
  • Key Laboratory of Western Mines and Hazards Prevention, Ministry of Education of China, Xi'an 710054, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Shao, X., Wang, Z., Tang, R., Zhao, B., Ning, J., Tian, C., Wang, W., Zhang, Y., & Du, X. (2024). Enhancing Mid-Term Strength and Microstructure of Fly Ash–Cement Paste Backfill with Silica Fume for Continuous Mining and Backfilling Operations. Materials, 17(24), 6037. https://doi.org/10.3390/ma17246037

Vancouver

Shao X, Wang Z, Tang R, Zhao B, Ning J, Tian C, et al. Enhancing Mid-Term Strength and Microstructure of Fly Ash–Cement Paste Backfill with Silica Fume for Continuous Mining and Backfilling Operations. Materials. 2024;17(24):6037. doi:10.3390/ma17246037

BibTeX
@article{Shao2024,
  author = {Shao, Xiaoping and Wang, Zhengchun and Tang, Renlong and Zhao, Bingchao and Ning, Jianbo and Tian, Chuang and Wang, Wei and Zhang, Yibo and Du, Xing},
  title = {Enhancing Mid-Term Strength and Microstructure of Fly Ash–Cement Paste Backfill with Silica Fume for Continuous Mining and Backfilling Operations},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6037},
  doi = {10.3390/ma17246037}
}
Kostenlos starten →