EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical, Durability, and Microstructure Characterization of Pervious Concrete Incorporating Polypropylene Fibers and Fly Ash/Silica Fume

Hassan Bilal, Xiaojian Gao, Liborio Cavaleri, Alamgir Khan, Miao Ren

Journal of Composites Science · 03.11.2024 · 8 (11) · 456

DOI: 10.3390/jcs8110456 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 03.11.2024. Verfasst von Hassan Bilal und 4 weiteren Autor:innen. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Provincial Applied Technology Research and Development Major Project, Natural Science Foundation of Heilongjiang Province of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pervious concrete, because of its high porosity, is a suitable material for reducing the effects of water precipitations and is primarily utilized in road pavements. In this study, the effects of binder-to-aggregate (B/A) ratios, as well as mineral admixtures with and without polypropylene fibers (PPFs) (0.2% by volume), including fly ash (FA) or silica fume (SF) (10% by substitution of cement), on the mechanical properties and durability of pervious concrete were experimentally observed. The experimental campaign included the following tests: permeability, porosity, compressive strength, splitting tensile strength, and flexural strength tests. The durability performance was evaluated by observing freeze–thaw cycles and abrasion resistance after 28 d curing. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal analysis (TGA-DTA), and scanning electron microscopy (SEM) combined with energy dispersive spectroscopy (EDS) were employed to investigate the phase composition and microstructure. The results revealed that, for an assigned B/A ratio identified as optimal, the incorporation of mineral admixtures and fibers mutually compensated for their respective negative effects, resulting in the effective enhancement of both mechanical/microstructural characteristics and durability properties. In general, pervious concrete developed with fly ash or silica fume achieved higher compressive strength (>35 MPA) and permeability of 4 mm/s, whereas the binary combination of fly ash or silica fume with 0.2% PPFs yielded a flexural strength greater than 6 MPA and a permeability of 6 mm/s. Silica fume-based pervious concrete exhibited excellent performance in terms of freeze–thaw (F-T) cycling and abrasion resistance, followed by fiber-reinforced pervious concrete, except fly ash-based pervious concrete. Microstructural analysis showed that the inclusion of fly ash or silica fume reduced the harmful capillary pores and refined the pore enlargement caused by PPFs in the cement interface matrix through micro-filling and a pozzolanic reaction, leading to improved mechanical and durability characteristics of pervious concrete.

Förderung

  • Provincial Applied Technology Research and Development Major Project
  • Natural Science Foundation of Heilongjiang Province of China

Zitieren

APA

Bilal, H., Gao, X., Cavaleri, L., Khan, A., & Ren, M. (2024). Mechanical, Durability, and Microstructure Characterization of Pervious Concrete Incorporating Polypropylene Fibers and Fly Ash/Silica Fume. Journal of Composites Science, 8(11), 456. https://doi.org/10.3390/jcs8110456

Vancouver

Bilal H, Gao X, Cavaleri L, Khan A, Ren M. Mechanical, Durability, and Microstructure Characterization of Pervious Concrete Incorporating Polypropylene Fibers and Fly Ash/Silica Fume. Journal of Composites Science. 2024;8(11):456. doi:10.3390/jcs8110456

BibTeX
@article{Bilal2024,
  author = {Bilal, Hassan and Gao, Xiaojian and Cavaleri, Liborio and Khan, Alamgir and Ren, Miao},
  title = {Mechanical, Durability, and Microstructure Characterization of Pervious Concrete Incorporating Polypropylene Fibers and Fly Ash/Silica Fume},
  journal = {Journal of Composites Science},
  year = {2024},
  volume = {8},
  number = {11},
  pages = {456},
  doi = {10.3390/jcs8110456}
}
Kostenlos starten →