Enhanced Interfacial Properties of Carbon Fiber/Polymerization of Monomers Reactants Method Polyimide Composite by Polyimide Sizing
Materials · 05.12.2024 · 17 (23) · 5962
DOI: 10.3390/ma17235962 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.12.2024. Verfasst von Chengyu Huang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Carbon fiber (CF)-reinforced polyimide (PI) resin matrix composites have great application potential in areas such as rail transport, medical devices, and aerospace due to their excellent thermal stability, dielectric properties, solvent resistance, and mechanical properties. However, the epoxy sizing agent used for traditional carbon fiber cannot withstand the processing temperature of polyimide resin, of up to 350 °C, resulting in the formation of pores or defects at the interface between the fiber and the resin matrix, leading to the degradation of the overall composite properties. To overcome this problem, in this study, a low-molecular-weight thermosetting polyimide sizing agent was prepared and the processability of the sized carbon fiber was optimized by a thermoplastic polyimide. Compared with the unsized carbon fiber polyimide composites, the interfacial properties of the composites after the polyimide sizing treatment were significantly improved, with the interfacial shear strength (IFSS) increasing from 82.08 MPa to 136.27 MPa, the interlaminar shear strength (ILSS) increasing from 103.7 to 124.9 MPa, and the bending strength increasing from 2262.2 MPa to 2562.1 MPa. The sizing agent acts as a bridge between the carbon fiber and polyimide resin, with anchorage and bonding at the interface between the fiber and resin, which are beneficial for enhancing the interface performance of composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Beihang University, Beijing 100191, China.
- AVIC Manufacturing Technology Institute Composite Technology Center, Beijing 101300, China.
- School of Optics and Photonics, Beijing Institute of Technology, Beijing 100811, China.
ORCID-Profile: Chengyu Huang, Hansong Liu, Peng Zhang
Zitieren
APA
Huang, C., Sun, J., Liu, Z., Li, B., Sun, M., Liu, H., Zhao, Y., Zhang, P., & Bao, J. (2024). Enhanced Interfacial Properties of Carbon Fiber/Polymerization of Monomers Reactants Method Polyimide Composite by Polyimide Sizing. Materials, 17(23), 5962. https://doi.org/10.3390/ma17235962
Vancouver
Huang C, Sun J, Liu Z, Li B, Sun M, Liu H, et al. Enhanced Interfacial Properties of Carbon Fiber/Polymerization of Monomers Reactants Method Polyimide Composite by Polyimide Sizing. Materials. 2024;17(23):5962. doi:10.3390/ma17235962
BibTeX
@article{Huang2024,
author = {Huang, Chengyu and Sun, Jinsong and Liu, Zhiwei and Li, Bo and Sun, Mingchen and Liu, Hansong and Zhao, Yan and Zhang, Peng and Bao, Jianwen},
title = {Enhanced Interfacial Properties of Carbon Fiber/Polymerization of Monomers Reactants Method Polyimide Composite by Polyimide Sizing},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5962},
doi = {10.3390/ma17235962}
}
EUVIMED