EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Water-Soluble Thermoplastic Polyamide Acid Sizing Agents for Enhancing Interfacial Properties of Carbon Fibre Reinforced Polyimide Composites

Chengyu Huang iD, Peng Zhang iD, Bo Li, Mingchen Sun, Hansong Liu iD, Jinsong Sun, Yan Zhao, Jianwen Bao

Materials · 26.05.2024 · 17 (11) · 2559

DOI: 10.3390/ma17112559 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.05.2024. Verfasst von Chengyu Huang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon-fiber-reinforced polyimide (PI) resin composites have gained significant attention in the field of continuous-fiber-reinforced polymers, in which the interfacial bonding between carbon fiber and matrix resin has been an important research direction. This study designed and prepared a water-soluble thermoplastic polyamide acid sizing agent to improve the wettability of carbon fiber, enhance the van der Waals forces between carbon fiber and resin and strengthen the chemical bonding between the sizing agent and the alkyne-capped polyimide resin by introducing alkyne-containing functional groups into the sizing agent. This study found that the addition of a sizing layer effectively bridged the large modulus difference between the fiber and resin regions, resulting in the formation of an interfacial layer approximately 85 nm thick. This layer facilitated the transfer of stress from the matrix to the reinforced carbon fiber, leading to a significant improvement in the interfacial properties of the composites. Adjusting the concentration of the sizing agent showed that composites treated with 3% had the best interfacial properties. The interfacial shear strength increased from 82.08 MPa to 108.62 MPa (32.33%) compared to unsized carbon fiber. This research is significant for developing sizing agents suitable for carbon-fiber-reinforced polyimide composites.

Schlagwörter

Stichwörter der Autor:innen

carbon fiberinterfacial performancepolyimide resinthermoplasticwater-soluble agent

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Beihang University, Beijing 100191, China.
  • Composite Technology Center, AVIC Manufacturing Technology Institute, Beijing 100012, China.
  • School of Optics and Photonics, Beijing Institute of Technology, Beijing 100811, China.

ORCID-Profile: Chengyu Huang, Peng Zhang, Hansong Liu

Zitieren

APA

Huang, C., Zhang, P., Li, B., Sun, M., Liu, H., Sun, J., Zhao, Y., & Bao, J. (2024). A Water-Soluble Thermoplastic Polyamide Acid Sizing Agents for Enhancing Interfacial Properties of Carbon Fibre Reinforced Polyimide Composites. Materials, 17(11), 2559. https://doi.org/10.3390/ma17112559

Vancouver

Huang C, Zhang P, Li B, Sun M, Liu H, Sun J, et al. A Water-Soluble Thermoplastic Polyamide Acid Sizing Agents for Enhancing Interfacial Properties of Carbon Fibre Reinforced Polyimide Composites. Materials. 2024;17(11):2559. doi:10.3390/ma17112559

BibTeX
@article{Huang2024,
  author = {Huang, Chengyu and Zhang, Peng and Li, Bo and Sun, Mingchen and Liu, Hansong and Sun, Jinsong and Zhao, Yan and Bao, Jianwen},
  title = {A Water-Soluble Thermoplastic Polyamide Acid Sizing Agents for Enhancing Interfacial Properties of Carbon Fibre Reinforced Polyimide Composites},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {11},
  pages = {2559},
  doi = {10.3390/ma17112559}
}
Kostenlos starten →