State of the Art in Incremental Forming: Process Variants, Tooling, Industrial Applications for Complex Part Manufacturing and Sustainability of the Process
Materials · 27.11.2024 · 17 (23) · 5811
DOI: 10.3390/ma17235811 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 27.11.2024. Verfasst von Gabriela-Petruța Popp und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Machines and Equipment, Engineering Faculty, Lucian Blaga University of Sibiu, 550025 Sibiu, Romania. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 121 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lucian Blaga University of Sibiu (Knowledge Transfer Center) and Hasso Plattner Foundation, Lucian Blaga University of Sibiu (Knowledge Transfer Center), Hasso Plattner Foundation.
Abstract (Originalsprache)
This paper explores the development and application of the incremental forming process, an innovative method for manufacturing complex parts with high flexibility and low tooling costs. The review categorizes three key process variants: Single Point Incremental Forming (SPIF), Two Point Incremental Forming (TPIF), and Incremental Forming with Conjugated Active Plate (IFCAP). This study demonstrates the significant effects of these process variants on part accuracy and material behavior, particularly under varying process conditions. This study identifies critical technological parameters such as tool diameter, feed rate, and vertical step size. The findings also demonstrate the role of optimized toolpaths and lubrication in improving process efficiency. Applications of incremental forming across various industries, including automotive, aerospace, medical, and construction, demonstrate its versatility in prototype production and small-series manufacturing. These results contribute to a deeper understanding of incremental forming, offering practical recommendations to enhance precision, scalability, and material formability, and supporting future innovations and broader industrial applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial Machines and Equipment, Engineering Faculty, Lucian Blaga University of Sibiu, 550025 Sibiu, Romania.
- Department of Civil Construction and Management, Faculty of Civil Engineering, Technical University of Cluj-Napoca, 400114 Cluj-Napoca, Romania.
ORCID-Profile: Sever-Gabriel Racz, Radu-Eugen Breaz, Valentin Ștefan Oleksik, Mihai-Octavian Popp, Anca-Lucia Chicea
Förderung
- Lucian Blaga University of Sibiu (Knowledge Transfer Center) and Hasso Plattner Foundation
- Lucian Blaga University of Sibiu (Knowledge Transfer Center)
- Hasso Plattner Foundation
Zitieren
APA
Popp, G. P., Racz, S. G., Breaz, R. E., Oleksik, V. Ș., Popp, M. O., Morar, D. E., Chicea, A. L., & Popp, I. O. (2024). State of the Art in Incremental Forming: Process Variants, Tooling, Industrial Applications for Complex Part Manufacturing and Sustainability of the Process. Materials, 17(23), 5811. https://doi.org/10.3390/ma17235811
Vancouver
Popp GP, Racz SG, Breaz RE, Oleksik VȘ, Popp MO, Morar DE, et al. State of the Art in Incremental Forming: Process Variants, Tooling, Industrial Applications for Complex Part Manufacturing and Sustainability of the Process. Materials. 2024;17(23):5811. doi:10.3390/ma17235811
BibTeX
@article{Popp2024,
author = {Popp, Gabriela-Petruța and Racz, Sever-Gabriel and Breaz, Radu-Eugen and Oleksik, Valentin Ștefan and Popp, Mihai-Octavian and Morar, Dana-Elena and Chicea, Anca-Lucia and Popp, Ilie-Octavian},
title = {State of the Art in Incremental Forming: Process Variants, Tooling, Industrial Applications for Complex Part Manufacturing and Sustainability of the Process},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5811},
doi = {10.3390/ma17235811}
}
EUVIMED