Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel
Welding in the World · 2024-06 · 68 (6) · 1563-1573
DOI: 10.1007/s40194-024-01718-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Welding in the World, online erschienen am 26.02.2024. Verfasst von Michael Rhode und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesanstalt für Materialforschung und -prüfung (BAM).
Abstract (Originalsprache)
Multiple principal element alloys encompass the well-known high entropy alloys (HEA). The alloy system represents a new class of materials consisting of at least three alloying elements, each containing 5 to 35 at.%. Thus, this alloying concept differs fundamentally from conventional materials such as steel or nickel alloys. For this purpose, the alloying elements are specifically selected, the microstructures are adjusted in a single-phase and, in some cases, multi-phase manner. In particular, conflicting goals, such as the trade-off between strength and ductility in conventional steels, are overcome. However, in the last 20 years, the focus has been on material synthesis. With the increase in available material quantities, the focus is now on processing issues such as joining and welding processes. The weldability of HEAs has received very little attention so far. The experience with dissimilar metal welds is completely lacking but is essential for the application of these materials in combination with conventional materials. The present study presents comprehensive experimental results on the weldability of an equimolar CoCrFeMnNi-HEA in cold-rolled and heat-treated condition, which was joined by tungsten inert gas welding to an austenitic steel AISI 304. The mechanical properties of the dissimilar metal welds were characterized by cross-weld tensile samples, whereas the local deformation in the weld of the different welding zones was measured by digital image correlation. In accordance with the respective initial HEA condition (cold-rolled vs. heat-treated), the local strain behavior was divergent and influenced the global mechanical properties of both DMW types. Nonetheless, the experiments provided proof in principle of the weldability for dissimilar joints of the CoCrFeMnNi-HEA welded to conventional materials like austenitic stainless steels ensuring a corresponding capability for mechanical loading. This allows further considerations on the application of these innovative materials.
Förderung
- Bundesanstalt für Materialforschung und -prüfung (BAM)
Zitieren
APA
Rhode, M., Erxleben, K., Richter, T., Schroepfer, D., Mente, T., & Michael, T. (2024). Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel. Welding in the World, 68(6), 1563-1573. https://doi.org/10.1007/s40194-024-01718-4
Vancouver
Rhode M, Erxleben K, Richter T, Schroepfer D, Mente T, Michael T. Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel. Welding in the World. 2024;68(6):1563-1573. doi:10.1007/s40194-024-01718-4
BibTeX
@article{Rhode2024,
author = {Rhode, Michael and Erxleben, Kjell and Richter, Tim and Schroepfer, Dirk and Mente, Tobias and Michael, Thomas},
title = {Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel},
journal = {Welding in the World},
year = {2024},
volume = {68},
number = {6},
pages = {1563--1573},
doi = {10.1007/s40194-024-01718-4}
}
EUVIMED