Effect of Energy Density on Mechanical Properties of NiTiCu Shape Memory Alloys Prepared by SLM
Materials · 21.11.2024 · 17 (23) · 5693
DOI: 10.3390/ma17235693 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.11.2024. Verfasst von Yi Ba und 5 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Nanophotonic Functional Materials and Devices, School of Optoelectronic Science and Engineering, South China N…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Guangdong Province, Key field research projects in Foshan City.
Abstract (Originalsprache)
In the Ni-Ti shape memory alloy system, Cu elements are used to replace Ni elements. A NiTiCu alloy with a molar ratio of 45:50:5 was prepared using laser selective melting technology. The density, composition, microstructure, and mechanical properties of the NiTiCu alloy were investigated. The results indicate that the highest density, exceeding 99.7%, was achieved when processing NiTiCu with parameters of 115 mm/s and 90 W. X-ray diffraction (XRD) analysis revealed that the primary phases of the sample are B2 and a minor amount of NiTi0.8Cu0.2. Energy-dispersive X-ray spectroscopy (EDS) observations of the NiTiCu alloy in the X-Y and X-Z planes show that Ni, Ti, and Cu elements are distributed nearly uniformly. Electron backscatter diffraction (EBSD) analysis revealed fine grain sizes, with grain sizes ranging from 140 μm to 160 μm. The X-Y plane predominantly exhibits equiaxed grains with a grain orientation between and , and a texture strength of 1.312; the X-Z plane predominantly exhibits columnar grains with grain orientations between and , and a texture strength of 1.427. The sample demonstrates good mechanical properties at room temperature, with a tensile strength of 375 MPa, exhibiting a ductile–brittle mixed fracture mode. The average microhardness is 240 HV for the X-Y plane and 235 HV for the X-Z plane.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of Nanophotonic Functional Materials and Devices, School of Optoelectronic Science and Engineering, South China Normal University, Guangzhou 510006, China.
- Riton Additive Technology Co., Ltd., Guangzhou 510320, China.
- College of Physics and Optoelectronic Engineering, Jinan University, Guangzhou 510632, China.
Förderung
- Natural Science Foundation of Guangdong Province
- Key field research projects in Foshan City
Zitieren
APA
Ba, Y., Lv, Y., Yan, M., Jin, H., Guo, L., & Zhang, Q. (2024). Effect of Energy Density on Mechanical Properties of NiTiCu Shape Memory Alloys Prepared by SLM. Materials, 17(23), 5693. https://doi.org/10.3390/ma17235693
Vancouver
Ba Y, Lv Y, Yan M, Jin H, Guo L, Zhang Q. Effect of Energy Density on Mechanical Properties of NiTiCu Shape Memory Alloys Prepared by SLM. Materials. 2024;17(23):5693. doi:10.3390/ma17235693
BibTeX
@article{Ba2024,
author = {Ba, Yi and Lv, Yan and Yan, Miaoning and Jin, Hongxu and Guo, Liang and Zhang, Qingmao},
title = {Effect of Energy Density on Mechanical Properties of NiTiCu Shape Memory Alloys Prepared by SLM},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5693},
doi = {10.3390/ma17235693}
}
EUVIMED