EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cu Alloying on the Microstructural and Functional Evolution of NiTiCu Shape Memory Alloys

Eslam Salaheldin Abdelhady, Andrey Molotnikov, Tom Vaneker, Ian Gibson, Mehrshad Mehrpouya

Shape Memory and Superelasticity · 2026-03 · 12 (1) · 97-106

DOI: 10.1007/s40830-025-00577-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Shape Memory and Superelasticity, online erschienen am 25.09.2025. Verfasst von Eslam Salaheldin Abdelhady und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

NiTi-based shape memory alloys (SMAs) are gaining prominence as ternary alloying and advanced processing techniques offer improved control over microstructure and functional behavior. This study examines the effect of copper (Cu) alloying on the microstructural and thermoelastic properties of (NiTi) 100− x Cu x alloys with x = 0, 5, 8, 12, and 20 wt.%, synthesized via vacuum induction melting (VIM). Microstructural analysis showed that increasing Cu content significantly altered the phase composition, lowering the onset of martensitic transformation from 70 °C in the binary alloy to as low as − 60 °C. A clear correlation was observed between Cu concentration, secondary phase formation, and the balance of austenite and martensite. Cu induced both B19 and B19ʹ martensitic structures. However, excessive Cu content led to the formation of intermetallic compounds, grain boundary arrest, and partial suppression of the transformation. Hardness increased with Cu addition up to a certain point, then slightly declined due to increased martensite. The 20 wt.% Cu alloy showed the highest B19 content within a complex intermetallic matrix, while intermediate Cu levels produced a balanced B19/B19ʹ microstructure. These findings clarify the composition–microstructure–property relationships in NiTiCu SMAs and guide future design strategies for functional alloy systems.

Zitieren

APA

Abdelhady, E. S., Molotnikov, A., Vaneker, T., Gibson, I., & Mehrpouya, M. (2026). Effect of Cu Alloying on the Microstructural and Functional Evolution of NiTiCu Shape Memory Alloys. Shape Memory and Superelasticity, 12(1), 97-106. https://doi.org/10.1007/s40830-025-00577-2

Vancouver

Abdelhady ES, Molotnikov A, Vaneker T, Gibson I, Mehrpouya M. Effect of Cu Alloying on the Microstructural and Functional Evolution of NiTiCu Shape Memory Alloys. Shape Memory and Superelasticity. 2026;12(1):97-106. doi:10.1007/s40830-025-00577-2

BibTeX
@article{Abdelhady2026,
  author = {Abdelhady, Eslam Salaheldin and Molotnikov, Andrey and Vaneker, Tom and Gibson, Ian and Mehrpouya, Mehrshad},
  title = {Effect of Cu Alloying on the Microstructural and Functional Evolution of NiTiCu Shape Memory Alloys},
  journal = {Shape Memory and Superelasticity},
  year = {2026},
  volume = {12},
  number = {1},
  pages = {97--106},
  doi = {10.1007/s40830-025-00577-2}
}
Kostenlos starten →