Unveiling the Significance of Graphene Nanoplatelet (GNP) Localization in Tuning the Performance of PP/HDPE Blends
Materials · 20.11.2024 · 17 (22) · 5673
DOI: 10.3390/ma17225673 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.11.2024. Verfasst von Reza Salehiyan und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Computing, Engineering and the Built Environment, Edinburgh Napier University, Edinburgh EH10 5DT, UK. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Versarien.
Abstract (Originalsprache)
High-density polyethylene (HDPE) and polypropylene (PP) blends are widely used in industries requiring mechanically durable materials, yet the impact of processing parameters on blend performance remains underexplored. This study investigates the influence of blending sequence and screw speed on the properties of blends of HDPE and PP filled with 1.25 wt.% graphene nanoplatelets (GNPs). Changes in crystallization behaviour, tensile strength, and viscoelastic responses with blending sequence are studied. The addition of GNP increases the crystallization temperature (Tc) of PP in the PE/PP blend by 4 °C when GNP is pre-mixed with PE to form (PE+GNP)/PP blends. In contrast, when GNP is pre-mixed with PP to create (PP+GNP)/PE blends, the Tc of PP rises by approximately 11 °C, from 124 °C for the neat PE/PP blend to 135 °C. On the other hand, the Tc of PE remains unchanged regardless of the blending sequence. XRD patterns reveal the impact of blending regime on crystallinity, with GNP alignment affecting peak intensities confirming the more efficient interaction of GNPs with PP when premixed before blending with PE, (PP+GNP)/PE. Tensile moduli are less sensitive to the changes in processing, e.g., screw speed and blending sequence. In contrast, elongation at break and tensile toughness show distinct variations. The elongation at the break of the (PP+GNP)/PE blend decreases by 30% on increasing screw speed from 50 to 200 rpm. Moreover, the elongation at the break of (PE+GNP)/PP prepared at 100 rpm is ~40% higher than that of the (PP+GNP)/PE. (PE+GNP)/PP displays a ‘quasi-co-continuous’ morphology linked to its higher elastic modulus G′ compared to that of the (PP+GNP)/PE blend. This study highlights the importance and correlation between processing and blend properties, offering insights into fine-tuning polymer composite formulation for optimal performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Computing, Engineering and the Built Environment, Edinburgh Napier University, Edinburgh EH10 5DT, UK.
- International Institute for Nanocomposites Manufacturing (IINM), WMG, University of Warwick, Coventry CV4 7AL, West Midlands, UK.
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West Waterloo, Waterloo, ON N2L 3G1, Canada.
- Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada.
- Versarien Plc, Longhope GL17 0QZ, Gloucestershire, UK.
ORCID-Profile: Milad Kamkar, Uttandaraman Sundararaj, Tony McNally
Förderung
- Versarien
Zitieren
APA
Salehiyan, R., El-Samak, A. A., Kamkar, M., Erfanian, E., Hodge, S. A., Sundararaj, U., & McNally, T. (2024). Unveiling the Significance of Graphene Nanoplatelet (GNP) Localization in Tuning the Performance of PP/HDPE Blends. Materials, 17(22), 5673. https://doi.org/10.3390/ma17225673
Vancouver
Salehiyan R, El-Samak AA, Kamkar M, Erfanian E, Hodge SA, Sundararaj U, et al. Unveiling the Significance of Graphene Nanoplatelet (GNP) Localization in Tuning the Performance of PP/HDPE Blends. Materials. 2024;17(22):5673. doi:10.3390/ma17225673
BibTeX
@article{Salehiyan2024,
author = {Salehiyan, Reza and El-Samak, Ali A and Kamkar, Milad and Erfanian, Elnaz and Hodge, Stephen A and Sundararaj, Uttandaraman and McNally, Tony},
title = {Unveiling the Significance of Graphene Nanoplatelet (GNP) Localization in Tuning the Performance of PP/HDPE Blends},
journal = {Materials},
year = {2024},
volume = {17},
number = {22},
pages = {5673},
doi = {10.3390/ma17225673}
}
EUVIMED