Epoxy/Graphene Nanoplatelet (GNP) Nanocomposites: An Experimental Study on Tensile, Compressive, and Thermal Properties
Polymers · 23.05.2024 · 16 (11) · 1483
DOI: 10.3390/polym16111483 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.05.2024. Verfasst von Mahmuda Akter und 2 weiteren Autor:innen. Beteiligte Einrichtung: Nano/Microfiber Preform Design and Composite Laboratory, Department of Textile Engineering, Faculty of Engineering, Erciyes University, Talas, Kayser…. Die Arbeit wurde bisher 57-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Erciyes University Scientific Research Unit (EUBAP).
Abstract (Originalsprache)
This paper presents an experimental investigation of nanocomposites composed of three ratios of epoxy/graphene nanoplatelets (GNPs) by weight. The 0.1, 0.2, and 0.3 wt.% specimens were carefully manufactured, and their mechanical and thermal conductivity properties were examined. The tensile strength and modulus of epoxy/GNPs were enhanced by the large surface area of graphene nanoplatelets, causing crack deflection that created new fracture fronts and friction because of the rough fracture surface. However, the compressive strength was gradually reduced as GNP loading percentages increased. This was probably due to severe plastic yielding on the epoxy, leading to catastrophic axial splitting caused by premature fractures. Furthermore, the highest thermal conductivity was 0.1283 W/m-K, representing a 20.92% improvement over neat epoxy (0.1061 W/m-K) when 0.3 wt.% GNPs were added to the epoxy. This was because of efficient heat propagation in the GNPs due to electron movement through percolative paths. The tensile failure mode in epoxy/GNP nanocomposites showed a few deflected and bifurcated rough cracks and brittle, dimple-like fractures. Contrarily, compressive failure mode in GNP-added epoxy showed plastic flexural buckling and brittle large-axial splitting. The epoxy/GNP nanocomposites were considered a damage-tolerant material.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Nano/Microfiber Preform Design and Composite Laboratory, Department of Textile Engineering, Faculty of Engineering, Erciyes University, Talas, Kayseri 38039, Turkey.
- Department of Apparel Engineering, Faculty of Fashion Design and Apparel Engineering, Bangladesh University of Textiles, Tejgaon, Dhaka 1208, Bangladesh.
- Textile and Fashion Design Department, Faculty of Fine Arts, Gaziantep University, Gaziantep 27310, Turkey.
- Nanotechnology Application and Research Centre (ERNAM), Erciyes University, Talas, Kayseri 38039, Turkey.
ORCID-Profile: Mahmuda Akter, Huseyin Ozdemir, Kadir Bilisik
Förderung
- Erciyes University Scientific Research Unit (EUBAP)
Zitieren
APA
Akter, M., Ozdemir, H., & Bilisik, K. (2024). Epoxy/Graphene Nanoplatelet (GNP) Nanocomposites: An Experimental Study on Tensile, Compressive, and Thermal Properties. Polymers, 16(11), 1483. https://doi.org/10.3390/polym16111483
Vancouver
Akter M, Ozdemir H, Bilisik K. Epoxy/Graphene Nanoplatelet (GNP) Nanocomposites: An Experimental Study on Tensile, Compressive, and Thermal Properties. Polymers. 2024;16(11):1483. doi:10.3390/polym16111483
BibTeX
@article{Akter2024,
author = {Akter, Mahmuda and Ozdemir, Huseyin and Bilisik, Kadir},
title = {Epoxy/Graphene Nanoplatelet (GNP) Nanocomposites: An Experimental Study on Tensile, Compressive, and Thermal Properties},
journal = {Polymers},
year = {2024},
volume = {16},
number = {11},
pages = {1483},
doi = {10.3390/polym16111483}
}
EUVIMED