EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Waste Concrete Powder Content and Microwave Heating Parameters on the Properties of Porous Alkali-Activated Materials from Coal Gangue

Vasilii Mischinenko iD, Andrey Vasilchenko, Georgy Lazorenko iD

Materials · 20.11.2024 · 17 (22) · 5670

DOI: 10.3390/ma17225670 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.11.2024. Verfasst von Vasilii Mischinenko und 2 weiteren Autor:innen. Beteiligte Einrichtung: Technological Faculty, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya St., 132, Novocherkassk 346428, Russia. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation, Russian Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this research is to fabricate waste-based alkali-activated foams with better properties in a quick time by using energy-efficient techniques such as microwave irradiation. The present study reports the effect of microwave heating parameters, including heating time and output power, on the properties of porous alkali-activated materials (AAMs) that use coal gangue (CG) as a precursor. The effects of concrete waste (CW) content (0–20 wt %) on the performance and microstructure of CG-based AAMs were investigated. Mechanical, thermal, and microstructural investigations were conducted to characterize the obtained materials. The experimental results indicate that the best characteristics of CG-based alkali-activated foams were achieved when microwave power and microwave heating time were 800 W and 10 min, respectively. The foams prepared by adding the waste concrete powder increased stability and showed lower bulk density and thermal conductivity. When the waste concrete powder content was 10 wt %, the CG-based alkali-activated foams showed the best overall performance. At the same time, the mechanical properties of the alkali-activated foams declined only slightly (~9%). The findings of this work provide a basis for further studies on improving the characteristics of CG-based alkali-activated foams due to the physical effect of a microwave field on fresh mortar without the use of a chemical foaming agent while reducing energy consumption in the production process.

Schlagwörter

Stichwörter der Autor:innen

alkali-activated materialscoal ganguegeopolymermicrowave foamingmine waste

Autor:innen und Institutionen

  • Technological Faculty, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya St., 132, Novocherkassk 346428, Russia.
  • Climate Center, Novosibirsk State University, Pirogov Street, 2, Novosibirsk 630090, Russia.

ORCID-Profile: Vasilii Mischinenko, Georgy Lazorenko

Förderung

  • Ministry of Science and Higher Education of the Russian Federation
  • Russian Science Foundation

Zitieren

APA

Mischinenko, V., Vasilchenko, A., & Lazorenko, G. (2024). Effect of Waste Concrete Powder Content and Microwave Heating Parameters on the Properties of Porous Alkali-Activated Materials from Coal Gangue. Materials, 17(22), 5670. https://doi.org/10.3390/ma17225670

Vancouver

Mischinenko V, Vasilchenko A, Lazorenko G. Effect of Waste Concrete Powder Content and Microwave Heating Parameters on the Properties of Porous Alkali-Activated Materials from Coal Gangue. Materials. 2024;17(22):5670. doi:10.3390/ma17225670

BibTeX
@article{Mischinenko2024,
  author = {Mischinenko, Vasilii and Vasilchenko, Andrey and Lazorenko, Georgy},
  title = {Effect of Waste Concrete Powder Content and Microwave Heating Parameters on the Properties of Porous Alkali-Activated Materials from Coal Gangue},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {22},
  pages = {5670},
  doi = {10.3390/ma17225670}
}
Kostenlos starten →