EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biodegradable Polyurethane Foams Based on Polyols Obtained from Cellulose and Its Hydroxypropyl Derivative

Renata Lubczak, Małgorzata Kus-Liśkiewicz iD, Jacek Lubczak, Marzena Szpiłyk, Daniel Broda, Ewa Bobko iD

Materials · 10.11.2024 · 17 (22) · 5490

DOI: 10.3390/ma17225490 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.11.2024. Verfasst von Renata Lubczak und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Organic Chemistry, Faculty of Chemistry, Rzeszów University of Technology, Al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Financed by the Minister of Science and Higher Education Republic of Poland within the program "Regional Excellence Initiative", Regional Excellence Initiative, Regional Initiative of Excellence.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three methods of cellulose-derived polyol synthesis were elaborated. The suitable substrates were (hydroxypropyl)cellulose or cellulose, which were hydroxyalkylated in reactions with glycidol and ethylene carbonate in triethylene glycol or in water. The products were characterized by IR, 1H NMR, and MALDI ToF spectroscopies. For all polyols, IR spectra showed strong bands at 1060 cm−1 from the ether group formed upon the ring opening of GL and EC. The polyol obtained from (hydroxypropyl)cellulose in the triethylene glycol solvent was accompanied by oligomeric products of glycol hydroxyalkylation and oligomeric glycidol. The polyol obtained by the hydroxyalkylation of cellulose with glycidol and ethylene carbonate in the water contained units of hydroxyalkylated cellulose and products of hydroxyalkylation of water. The physical properties of the obtained polyols, like density, viscosity, and surface tension, were determined. The polyols were then used to obtain rigid polyurethane foams. The foams have apparent density, water uptake, and polymerization shrinkage similar to classic rigid PUFs. The foams showed advantageous thermal resistance in comparison with classic ones. After thermal exposure, their compressive strength improved. The biodegradation of the obtained materials was tested by a respirometric method in standard soil conditions by the measurement of biological oxygen demand and also using the cellulases or the enzymes responsible for cellulose degradation. It has been found that polyols are totally biodegradable within one month of exposure, while the foams obtained thereof are at least 50% biodegraded in the same conditions. The enzymatic biodegradation of the PUFs by the action of microbial cellulase was confirmed.

Schlagwörter

Stichwörter der Autor:innen

(hydroxypropyl)cellulosebiodegradationcellulasecelluloseethylene carbonateglycidolpolyolpolyurethane foams

Autor:innen und Institutionen

  • Department of Organic Chemistry, Faculty of Chemistry, Rzeszów University of Technology, Al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland.
  • Institute of Biotechnology, College of Natural Sciences, University of Rzeszow, Pigonia 1, 35-310 Rzeszow, Poland.
  • Center for Microelectronics and Nanotechnology, Institute of Materials Engineering, University of Rzeszow, Al. Rejtana 16, 35-959 Rzeszow, Poland.

ORCID-Profile: Małgorzata Kus-Liśkiewicz, Ewa Bobko

Förderung

  • Financed by the Minister of Science and Higher Education Republic of Poland within the program "Regional Excellence Initiative"
  • Regional Excellence Initiative
  • Regional Initiative of Excellence

Zitieren

APA

Lubczak, R., Kus-Liśkiewicz, M., Lubczak, J., Szpiłyk, M., Broda, D., & Bobko, E. (2024). Biodegradable Polyurethane Foams Based on Polyols Obtained from Cellulose and Its Hydroxypropyl Derivative. Materials, 17(22), 5490. https://doi.org/10.3390/ma17225490

Vancouver

Lubczak R, Kus-Liśkiewicz M, Lubczak J, Szpiłyk M, Broda D, Bobko E. Biodegradable Polyurethane Foams Based on Polyols Obtained from Cellulose and Its Hydroxypropyl Derivative. Materials. 2024;17(22):5490. doi:10.3390/ma17225490

BibTeX
@article{Lubczak2024,
  author = {Lubczak, Renata and Kus-Liśkiewicz, Małgorzata and Lubczak, Jacek and Szpiłyk, Marzena and Broda, Daniel and Bobko, Ewa},
  title = {Biodegradable Polyurethane Foams Based on Polyols Obtained from Cellulose and Its Hydroxypropyl Derivative},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {22},
  pages = {5490},
  doi = {10.3390/ma17225490}
}
Kostenlos starten →