EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Conductivity of AlSi10MnMg Alloy in Relation to Casting Technology and Heat Treatment Method

Iva Nováková iD, Milan Jelínek iD, Martin Švec

Materials · 31.10.2024 · 17 (21) · 5329

DOI: 10.3390/ma17215329 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2024. Verfasst von Iva Nováková und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Technology, Faculty of Mechanical Engineering, Technical University of Liberec, Studentská 1402/2, 461 17 Liberec, Czech Re…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Youth and Sports of the Czech Republic, Institutional Endowment for the Long-Term Conceptual Development of Research Institutes.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, with the development of electromobility, the requirements not only for the mechanical properties but also for the thermal conductivity of castings are increasing. This paper investigates the influence of casting and heat treatment technology on the thermal diffusivity and thermal conductivity of an AlSi10MnMg alloy. The thermal diffusivity was monitored as a function of temperature in the range of 50–300 °C for the material cast by high-pressure die casting (HPDC) and also by gravity sand casting (GSC) and gravity die casting (GDC). This study also investigated the effect of the T5 heat treatment temperature (artificial ageing without prior solution treatment—HT200, HT300, and HT400) on the thermal conductivity of the material cast by different technologies. Experiments confirmed that the thermal diffusivity or thermal conductivity of the alloy depends on the casting technology. The slower the cooling rate of the casting, the higher the thermal conductivity value. For the alloy in the as-cast condition, the thermal conductivity at 50 °C is in the range of about 125 to 138 [W·m−1·K−1]. Regardless of the casting method, the thermal conductivity tends to increase with temperature (50–300 °C). Furthermore, a positive effect of heat treatment without prior solution treatment (HT200, HT300, and HT400) on the thermal conductivity was demonstrated. Regardless of the casting method of the samples, the thermal conductivity also increases with increasing heat treatment temperature. The results further showed that when artificial ageing is performed in industrial practice on castings to increase mechanical properties in the temperature range of 160–230 °C, this heat treatment has a positive effect on thermal conductivity.

Schlagwörter

Stichwörter der Autor:innen

aluminium alloycastingheat treatmentthermal conductivitythermal diffusivity

Autor:innen und Institutionen

  • Department of Engineering Technology, Faculty of Mechanical Engineering, Technical University of Liberec, Studentská 1402/2, 461 17 Liberec, Czech Republic.

ORCID-Profile: Iva Nováková, Milan Jelínek

Förderung

  • Ministry of Education, Youth and Sports of the Czech Republic
  • Institutional Endowment for the Long-Term Conceptual Development of Research Institutes

Zitieren

APA

Nováková, I., Jelínek, M., & Švec, M. (2024). Thermal Conductivity of AlSi10MnMg Alloy in Relation to Casting Technology and Heat Treatment Method. Materials, 17(21), 5329. https://doi.org/10.3390/ma17215329

Vancouver

Nováková I, Jelínek M, Švec M. Thermal Conductivity of AlSi10MnMg Alloy in Relation to Casting Technology and Heat Treatment Method. Materials. 2024;17(21):5329. doi:10.3390/ma17215329

BibTeX
@article{Novkov2024,
  author = {Nováková, Iva and Jelínek, Milan and Švec, Martin},
  title = {Thermal Conductivity of AlSi10MnMg Alloy in Relation to Casting Technology and Heat Treatment Method},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5329},
  doi = {10.3390/ma17215329}
}
Kostenlos starten →