EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Modified Johnson Cook Model-Based Kalman Filter Method to Determine the Hot Flow Behavior of Sustainable AA6082 Al Alloy

Bandar Alzahrani, Ali Abd El-Aty iD, Sherif A Elatriby iD, Arafa S Sobh iD, Mohamed A Bhlol, Abdullah A Elfar, Muhammad Ali Siddiqui, Abdallah Shokry iD

Materials · 23.10.2024 · 17 (21) · 5169

DOI: 10.3390/ma17215169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2024. Verfasst von Bandar Alzahrani und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al Kharj 11942, Saudi Arabia. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam Bin Abdulaziz University (PSAU) as part of funding for its SDG Roadmap Research Funding Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AA6082 alloys play a significant role in advancing sustainable development goals (SDGs) by contributing to environmental sustainability, economic growth, and social well-being. These alloys are highly recyclable and align with SDG 12 by promoting resource efficiency and reducing waste. Their application in lightweight vehicles and improving energy efficiency in construction supports SDG 9 and SDG 11, as they help reduce carbon emissions and enhance the sustainability of urban environments. While AA6082 alloys offer significant advantages, their use has limitations that can hinder their industrial applications. One key challenge is their lower formability, particularly at room temperature. Elevated-temperature deformation is frequently employed to enhance the formability of these alloys and address their limitations. Thus, a deep understanding of the constitutive analysis of these alloys under a wide range of T and ε˙ is essential for manufacturing sound components from these alloys. Thus, this study aims to propose a new modification for the JC model (PJCM) and compare its reliability to predict the warm/hot flow behavior of AA6082 alloys with that of the original JC model (OJCM) and the modified JC model (LMJCM). By comparing the experimental results with these model results and confirming the determining correlation coefficient (R), average absolute relative error (AARE), and root mean square error (RMSE) values, it is concluded that the stresses predicted by the PMJCM closely match the experimental stresses of the LMJCM and OJCM because of the interaction between ε˙, ε, and T, which might be a reason for the complex nonlinear behavior of AA6082 alloys during hot deformation.

Schlagwörter

Stichwörter der Autor:innen

AA6082 alloyJC modelKalman filter methodSDG 9SDGselevated temperatureflow behaviorstrain rate

Autor:innen und Institutionen

  • Department of Mechanical Engineering, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University, Al Kharj 11942, Saudi Arabia.
  • Mechanical Engineering Department, Faculty of Engineering, Helwan University, Cairo 11795, Egypt.
  • School of Engineering and Applied Science, Smart Engineering Research Centre, Nile University, Giza 12677, Egypt.
  • Computational and Experimental Materials Innovation Group (CEMIG), Department of Metallurgical Engineering, NED University of Engineering and Technology, Karachi 75270, Pakistan.
  • Department of Mechanical Engineering, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt.

ORCID-Profile: Ali Abd El-Aty, Sherif A Elatriby, Arafa S Sobh, Abdallah Shokry

Förderung

  • Prince Sattam Bin Abdulaziz University (PSAU) as part of funding for its SDG Roadmap Research Funding Programme

Zitieren

APA

Alzahrani, B., Abd El-Aty, A., Elatriby, S. A., Sobh, A. S., Bhlol, M. A., Elfar, A. A., Siddiqui, M. A., & Shokry, A. (2024). A Modified Johnson Cook Model-Based Kalman Filter Method to Determine the Hot Flow Behavior of Sustainable AA6082 Al Alloy. Materials, 17(21), 5169. https://doi.org/10.3390/ma17215169

Vancouver

Alzahrani B, Abd El-Aty A, Elatriby SA, Sobh AS, Bhlol MA, Elfar AA, et al. A Modified Johnson Cook Model-Based Kalman Filter Method to Determine the Hot Flow Behavior of Sustainable AA6082 Al Alloy. Materials. 2024;17(21):5169. doi:10.3390/ma17215169

BibTeX
@article{Alzahrani2024,
  author = {Alzahrani, Bandar and Abd El-Aty, Ali and Elatriby, Sherif A and Sobh, Arafa S and Bhlol, Mohamed A and Elfar, Abdullah A and Siddiqui, Muhammad Ali and Shokry, Abdallah},
  title = {A Modified Johnson Cook Model-Based Kalman Filter Method to Determine the Hot Flow Behavior of Sustainable AA6082 Al Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5169},
  doi = {10.3390/ma17215169}
}
Kostenlos starten →