EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

On the Prediction of the Flow Behavior of Metals and Alloys at a Wide Range of Temperatures and Strain Rates Using Johnson–Cook and Modified Johnson–Cook-Based Models: A Review

Abdallah Shokry iD, Samer Gowid iD, Hasan Mulki iD, Ghais Kharmanda iD

Materials · 13.02.2023 · 16 (4) · 1574

DOI: 10.3390/ma16041574 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 13.02.2023. Verfasst von Abdallah Shokry und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt. Die Arbeit wurde bisher 90-mal zitiert (Crossref) und nennt 194 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: College of Engineering and Technology of the American University of the Middle East, Kuwait.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper reviews the flow behavior and mathematical modeling of various metals and alloys at a wide range of temperatures and strain rates. Furthermore, it discusses the effects of strain rate and temperature on flow behavior. Johnson–Cook is a strong phenomenological model that has been used extensively for predictions of the flow behaviors of metals and alloys. It has been implemented in finite element software packages to optimize strain, strain rate, and temperature as well as to simulate real behaviors in severe conditions. Thus, this work will discuss and critically review the well-proven Johnson–Cook and modified Johnson–Cook-based models. The latest model modifications, along with their strengths and limitations, are introduced and compared. The coupling effect between flow parameters is also presented and discussed. The various methods and techniques used for the determination of model constants are highlighted and discussed. Finally, future research directions for the mathematical modeling of flow behavior are provided.

Schlagwörter

Stichwörter der Autor:innen

Johnson–Cookconstitutive modelingelevated temperaturehigh strain ratehot deformationmodified Johnson–Cook

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt.
  • Department of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar.
  • College of Engineering and Technology, American University of the Middle East, Egaila 54200, Kuwait.
  • Mechanics Laboratory of Normandy, INSA Rouen Normandie, 76800 Saint Etienne du Rouvray, France.
  • 3D Printing 4U (UG), 51103 Cologne, Germany.

ORCID-Profile: Abdallah Shokry, Samer Gowid, Hasan Mulki, Ghais Kharmanda

Förderung

  • College of Engineering and Technology of the American University of the Middle East, Kuwait

Zitieren

APA

Shokry, A., Gowid, S., Mulki, H., & Kharmanda, G. (2023). On the Prediction of the Flow Behavior of Metals and Alloys at a Wide Range of Temperatures and Strain Rates Using Johnson–Cook and Modified Johnson–Cook-Based Models: A Review. Materials, 16(4), 1574. https://doi.org/10.3390/ma16041574

Vancouver

Shokry A, Gowid S, Mulki H, Kharmanda G. On the Prediction of the Flow Behavior of Metals and Alloys at a Wide Range of Temperatures and Strain Rates Using Johnson–Cook and Modified Johnson–Cook-Based Models: A Review. Materials. 2023;16(4):1574. doi:10.3390/ma16041574

BibTeX
@article{Shokry2023,
  author = {Shokry, Abdallah and Gowid, Samer and Mulki, Hasan and Kharmanda, Ghais},
  title = {On the Prediction of the Flow Behavior of Metals and Alloys at a Wide Range of Temperatures and Strain Rates Using Johnson–Cook and Modified Johnson–Cook-Based Models: A Review},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1574},
  doi = {10.3390/ma16041574}
}
Kostenlos starten →