EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Powder Bed Fusion Parameters Optimization for Enhanced Mechanical Properties of EOS Co-Cr Dental Alloy

Dalibor Viderščak iD, Zdravko Schauperl, Biserka Runje iD, Sanja Šolić, Amir Ćatić iD, Matjaž Godec iD, Irena Paulin, Črtomir Donik iD

Materials · 12.10.2024 · 17 (20) · 4993

DOI: 10.3390/ma17204993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.10.2024. Verfasst von Dalibor Viderščak und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10000 Zagreb, Croatia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovative Ti-Mg dental implants for the world market.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research explores how variations in laser powder bed fusion (LPBF) parameters—laser power (P), scanning speed (v), and base plate preheating temperature (ϑp)—affect the mechanical properties of the EOS Co-Cr SP2 dental alloy. A central composite design (CCD) was used to optimize the process parameters. Mechanical testing focused on crucial properties for dental applications, including yield strength (Rp0.2), elongation (ε), toughness (KVa), and flexural strength (Rms). Microstructural analysis was conducted using light and electron microscopy, while XRD identified microstructural phases. Statistical analysis (ANOVA, Scheffé post hoc test, α = 0.05) revealed significant effects of P, v, and ϑp on the mechanical properties. Response surface models (RSMs) were developed, and optimal parameters were determined to achieve maximum toughness and flexural strength. Maximum values were obtained with laser power above 205 W and base plate preheating at 310 °C. The mathematical model predicted toughness values with less than 5% deviation from experimental results, indicating high accuracy.

Schlagwörter

Stichwörter der Autor:innen

ANOVACCDCo-Cr dental alloyLPBFmechanical propertiesproduction parameters

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10000 Zagreb, Croatia.
  • Department of Mechanical Engineering, University North, Jurja Križanića 31b, 42000 Varaždin, Croatia.
  • School of Dental Medicine, University of Zagreb, Gundulićeva 5, 10000 Zagreb, Croatia.
  • Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia.

ORCID-Profile: Dalibor Viderščak, Biserka Runje, Amir Ćatić, Matjaž Godec, Črtomir Donik

Förderung

  • Innovative Ti-Mg dental implants for the world market

Zitieren

APA

Viderščak, D., Schauperl, Z., Runje, B., Šolić, S., Ćatić, A., Godec, M., Paulin, I., & Donik, Č. (2024). Laser Powder Bed Fusion Parameters Optimization for Enhanced Mechanical Properties of EOS Co-Cr Dental Alloy. Materials, 17(20), 4993. https://doi.org/10.3390/ma17204993

Vancouver

Viderščak D, Schauperl Z, Runje B, Šolić S, Ćatić A, Godec M, et al. Laser Powder Bed Fusion Parameters Optimization for Enhanced Mechanical Properties of EOS Co-Cr Dental Alloy. Materials. 2024;17(20):4993. doi:10.3390/ma17204993

BibTeX
@article{Viderak2024,
  author = {Viderščak, Dalibor and Schauperl, Zdravko and Runje, Biserka and Šolić, Sanja and Ćatić, Amir and Godec, Matjaž and Paulin, Irena and Donik, Črtomir},
  title = {Laser Powder Bed Fusion Parameters Optimization for Enhanced Mechanical Properties of EOS Co-Cr Dental Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {20},
  pages = {4993},
  doi = {10.3390/ma17204993}
}
Kostenlos starten →