Deflection and Performance Analysis of Shape Memory Alloy-Driven Fiber–Elastomer Composites with Anisotropic Structure
Materials · 02.10.2024 · 17 (19) · 4855
DOI: 10.3390/ma17194855 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.10.2024. Verfasst von Anett Endesfelder und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Science, Faculty of Mechanical Science and Engineering, TUD Dresden University of Technology, Helmholtzstraße 7, 01069 Dresden…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
Due to their advantageous characteristics, shape memory alloys (SMAs) are prominent representatives in smart materials. They can be used in application fields such as soft robotics, biomimetics, and medicine. Within this work, a fiber–elastomer composite with integrated SMA wire is developed and investigated. Bending and torsion occur when the SMA is activated because of the anisotropic structure of the textile. The metrological challenge in characterizing actuators that perform both bending and torsion lies in the large active deformation of the composite and the associated difficulties in fully imaging and analyzing this with optical measurement methods. In this work, a multi-sensor camera system with up to four pairs of cameras connected in parallel is used. The structure to be characterized is recorded from all sides to evaluate the movement in three-dimensional space. The energy input and the time required for an even deflection of the actuator are investigated experimentally. Here, the activation parameters for the practical energy input required for long life with good deflection, i.e., good efficiency, were analyzed. Different parameters and times are considered to minimize the energy input and, thus, to prevent possible overheating and damage to the wire. Thermography is used to evaluate the heating of the SMA wire at different actuation times over a defined time.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Science, Faculty of Mechanical Science and Engineering, TUD Dresden University of Technology, Helmholtzstraße 7, 01069 Dresden, Germany.
- Fraunhofer Institute of Material and Beam Technology IWS, 01277 Dresden, Germany.
- Institute of Textile Machinery and High Performance Material Technology, Faculty of Mechanical Science and Engineering, TUD Dresden University of Technology, 01062 Dresden, Germany.
- Institute of Control Theory, TUD Dresden University of Technology, 01062 Dresden, Germany.
- Institute of Solid-State Electronics, Faculty of Electrical and Computer Engineering, TUD Dresden University of Technology, Mommsenstraße 15, 01069 Dresden, Germany.
ORCID-Profile: Achyuth Ram Annadata, Aline Iobana Acevedo-Velazquez, Markus Koenigsdorff, Gerald Gerlach, Klaus Röbenack
Förderung
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Endesfelder, A., Annadata, A. R., Acevedo-Velazquez, A. I., Koenigsdorff, M., Gerlach, G., Röbenack, K., Cherif, C., & Zimmermann, M. (2024). Deflection and Performance Analysis of Shape Memory Alloy-Driven Fiber–Elastomer Composites with Anisotropic Structure. Materials, 17(19), 4855. https://doi.org/10.3390/ma17194855
Vancouver
Endesfelder A, Annadata AR, Acevedo-Velazquez AI, Koenigsdorff M, Gerlach G, Röbenack K, et al. Deflection and Performance Analysis of Shape Memory Alloy-Driven Fiber–Elastomer Composites with Anisotropic Structure. Materials. 2024;17(19):4855. doi:10.3390/ma17194855
BibTeX
@article{Endesfelder2024,
author = {Endesfelder, Anett and Annadata, Achyuth Ram and Acevedo-Velazquez, Aline Iobana and Koenigsdorff, Markus and Gerlach, Gerald and Röbenack, Klaus and Cherif, Chokri and Zimmermann, Martina},
title = {Deflection and Performance Analysis of Shape Memory Alloy-Driven Fiber–Elastomer Composites with Anisotropic Structure},
journal = {Materials},
year = {2024},
volume = {17},
number = {19},
pages = {4855},
doi = {10.3390/ma17194855}
}
EUVIMED