EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of As-Built Ti-6Al-4V and Ti-6Al-7Nb Alloys Produced by Selective Laser Melting Technology

Dorota Laskowska iD, Błażej Bałasz iD, Wojciech Zawadka iD

Materials · 19.09.2024 · 17 (18) · 4604

DOI: 10.3390/ma17184604 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.09.2024. Verfasst von Dorota Laskowska und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, Śniadeckich 2, 75-453 Koszalin, Poland. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing from metal powders using selective laser melting technology is gaining increasing interest in various industries. The purpose of this study was to determine the effect of changes in process parameter values on the relative density, microstructure and mechanical properties of Ti-6Al-4V and Ti-6Al-7Nb alloy samples. The experiment was conducted in response to a noticeable gap in the research on the manufacturability of the Ti-6Al-7Nb alloy in SLM technology. This topic is significant given the growing interest in this alloy for biomedical applications. The results of this study indicate that by properly selecting the volumetric energy density (VED), the relative density of the material produced and the surface roughness of the components can be effectively influenced. Microstructural analyses revealed similar patterns in both alloys manufactured under similar conditions, characterized by columnar β phase grains with needle-like α’ phases. Increasing the VED increased the tensile strength of the fabricated Ti-6Al-4V alloy components, while the opposite effect was observed for components fabricated from Ti-6Al-7Nb alloy. At the same time, Ti-6Al-7Nb alloy parts featured higher elongation values, which is desirable from the perspective of biomedical applications.

Schlagwörter

Stichwörter der Autor:innen

Ti-6Al-4VTi-6Al-7Nbadditive manufacturingbiomedical applicationsmechanical propertiesmicrostructurerelative densityselective laser melting

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, Śniadeckich 2, 75-453 Koszalin, Poland.

ORCID-Profile: Dorota Laskowska, Błażej Bałasz, Wojciech Zawadka

Zitieren

APA

Laskowska, D., Bałasz, B., & Zawadka, W. (2024). Microstructure and Mechanical Properties of As-Built Ti-6Al-4V and Ti-6Al-7Nb Alloys Produced by Selective Laser Melting Technology. Materials, 17(18), 4604. https://doi.org/10.3390/ma17184604

Vancouver

Laskowska D, Bałasz B, Zawadka W. Microstructure and Mechanical Properties of As-Built Ti-6Al-4V and Ti-6Al-7Nb Alloys Produced by Selective Laser Melting Technology. Materials. 2024;17(18):4604. doi:10.3390/ma17184604

BibTeX
@article{Laskowska2024,
  author = {Laskowska, Dorota and Bałasz, Błażej and Zawadka, Wojciech},
  title = {Microstructure and Mechanical Properties of As-Built Ti-6Al-4V and Ti-6Al-7Nb Alloys Produced by Selective Laser Melting Technology},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {18},
  pages = {4604},
  doi = {10.3390/ma17184604}
}
Kostenlos starten →