EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Investigation into Mechanical Properties of 3D Printed Thermoplastic-Thermoset Mixed-Matrix Composites: Synergistic Effects of Thermoplastic Skeletal Lattice Geometries and Thermoset Properties

Saleh Khanjar, Srimanta Barui, Kunal Kate iD, Kameswara Pavan Kumar Ajjarapu

Materials · 09.09.2024 · 17 (17) · 4426

DOI: 10.3390/ma17174426 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.09.2024. Verfasst von Saleh Khanjar und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Shumaker Research Building, University of Louisville, Kentucky, KY 40208, USA. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to develop thermoplastic (TP) and thermoset (TS) based mixed matrix composite using design dependent physical compatibility. Using thermoplastic-based (PLA) skeletal lattices with diverse patterns (gyroid and grid) and different infill densities (10% and 20%) followed by infiltration of two different thermoset resin systems (epoxy and polyurethane-based) using a customized FDM 3D printer equipped with a resin dispensing unit, the optimised design and TP-TS material combination was established for best mechanical performance. Under uniaxial tensile stress, the failure modes of TP gyroid structures with polyurethane-based composites included ‘fiber pull-out’, interfacial debonding and fiber breakage, while epoxy based mixed matrix composites with all design variants demonstrated brittle failure. Higher elongation (higher area under curve) was observed in 20% infilled gyroid patterned composite with polyurethane matrix indicating the capability of operation in mechanical shock absorption application. Electron microscopy-based fractography analysis revealed that thermoset matrix properties governed the fracture modes for the thermoplastic phase. This work focused on the strategic optimisation of both toughness and stiffness of mixed matrix composite components for rapid fabrication of construction materials.

Schlagwörter

Stichwörter der Autor:innen

fractographyfused filament fabricationmechanical propertiesmixed matrix compositethermoplastic-thermoset

Autor:innen und Institutionen

  • Mechanical Engineering Department, Shumaker Research Building, University of Louisville, Kentucky, KY 40208, USA.

ORCID-Profile: Kunal Kate

Zitieren

APA

Khanjar, S., Barui, S., Kate, K., & Ajjarapu, K. P. K. (2024). An Investigation into Mechanical Properties of 3D Printed Thermoplastic-Thermoset Mixed-Matrix Composites: Synergistic Effects of Thermoplastic Skeletal Lattice Geometries and Thermoset Properties. Materials, 17(17), 4426. https://doi.org/10.3390/ma17174426

Vancouver

Khanjar S, Barui S, Kate K, Ajjarapu KPK. An Investigation into Mechanical Properties of 3D Printed Thermoplastic-Thermoset Mixed-Matrix Composites: Synergistic Effects of Thermoplastic Skeletal Lattice Geometries and Thermoset Properties. Materials. 2024;17(17):4426. doi:10.3390/ma17174426

BibTeX
@article{Khanjar2024,
  author = {Khanjar, Saleh and Barui, Srimanta and Kate, Kunal and Ajjarapu, Kameswara Pavan Kumar},
  title = {An Investigation into Mechanical Properties of 3D Printed Thermoplastic-Thermoset Mixed-Matrix Composites: Synergistic Effects of Thermoplastic Skeletal Lattice Geometries and Thermoset Properties},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4426},
  doi = {10.3390/ma17174426}
}
Kostenlos starten →