Aspects of Nickel, Cobalt and Lithium, the Three Key Elements for Li-Ion Batteries: An Overview on Resources, Demands, and Production
Materials · 05.09.2024 · 17 (17) · 4389
DOI: 10.3390/ma17174389 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 05.09.2024. Verfasst von Paul Kalungi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Materials Engineering, Wright State University, Dayton, OH 45435, USA. Die Arbeit wurde bisher 66-mal zitiert (Crossref) und nennt 205 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
With the booming of renewable clean energies towards reducing carbon emission, demands for lithium-ion batteries (LIBs) in applications to transportation vehicles and power stations are increasing exponentially. As a consequence, great pressures have been posed on the technological development and production of valuable elements key to LIBs, in addition to concerns about depletion of natural resources, environmental impacts, and management of waste batteries. In this paper, we compile recent information on lithium, nickel, and cobalt, the three most crucial elements utilized in LIBs, in terms of demands, current identified terrestrial resources, extraction technologies from primary natural resources and waste. Most nickel and cobalt are currently produced from high-grade sulfide ores via a pyrometallurgical approach. Increased demands have stimulated production of Ni and Co from low-grade laterites, which is commonly performed through the hydrometallurgical process. Most lithium exists in brines and is extracted via evaporation–precipitation in common industrial practice. It is noteworthy that at present, the pyrometallurgical process is energy-intensive and polluting in terms of gas emissions. Hydrometallurgical processes utilize large amounts of alkaline or acidic media in combination with reducing agents, generating hazardous waste streams. Traditional evaporation–precipitation consumes time, water, and land. Extraction of these elements from deep seas and recycling from waste are emerging as technologies. Advanced energy-saving and environmentally friendly processes are under extensive research and development and are crucial in the process of renewable clean energy implementation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Materials Engineering, Wright State University, Dayton, OH 45435, USA.
- Department of Materials Science and Engineering, University of Science and Technology Liaoning, Anshan 114051, China.
ORCID-Profile: Zhuo Yao, Hong Huang
Zitieren
APA
Kalungi, P., Yao, Z., & Huang, H. (2024). Aspects of Nickel, Cobalt and Lithium, the Three Key Elements for Li-Ion Batteries: An Overview on Resources, Demands, and Production. Materials, 17(17), 4389. https://doi.org/10.3390/ma17174389
Vancouver
Kalungi P, Yao Z, Huang H. Aspects of Nickel, Cobalt and Lithium, the Three Key Elements for Li-Ion Batteries: An Overview on Resources, Demands, and Production. Materials. 2024;17(17):4389. doi:10.3390/ma17174389
BibTeX
@article{Kalungi2024,
author = {Kalungi, Paul and Yao, Zhuo and Huang, Hong},
title = {Aspects of Nickel, Cobalt and Lithium, the Three Key Elements for Li-Ion Batteries: An Overview on Resources, Demands, and Production},
journal = {Materials},
year = {2024},
volume = {17},
number = {17},
pages = {4389},
doi = {10.3390/ma17174389}
}
EUVIMED