EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nickel and Cobalt Recovery from Spent Lithium-Ion Batteries via Electrodialysis Metathesis

Adam Isaksson iD, Juan Anaya Garzon iD, Ida Strandkvist, Lena Sundqvist Öqvist

Membranes · 25.03.2025 · 15 (4) · 97

DOI: 10.3390/membranes15040097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 25.03.2025. Verfasst von Adam Isaksson und 3 weiteren Autor:innen. Beteiligte Einrichtung: Division of Minerals and Metallurgical Engineering, Luleå University of Technology, 971 87 Luleå, Sweden. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund, European Regional Development Fund and the Green Transition North circular economy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling of spent lithium-ion batteries is important due to the increasing demand for electric vehicles and efforts to realize a circular economy. There is a need to develop environmentally friendly processes for the refining of nickel, cobalt, and other metals contained in the batteries. Electrodialysis is an appealing method for recycling of battery metals with selective separation and low chemical input. In this study, sodium sulfate was used in an electrodialysis metathesis procedure to sequentially separate EDTA-chelated nickel and cobalt. Replacing hitherto used sulfuric acid with sodium sulfate mitigates membrane fouling caused by precipitation of EDTA. It was possible to separate up to 97.9% of nickel and 96.6% of cobalt at 0.10 M, a 30-times higher concentration than previously reported for electrodialysis of similar solutions. Through the thermally activated persulfate method, new to this application, 99.7% of nickel and 87.0% of cobalt could be precipitated from their EDTA chelates. Impurity behavior during electrodialysis of battery leachates has not previously been described in the literature. It is paramount to remove copper, iron, and phosphorous prior to electrodialysis since they contaminate the nickel product. Aluminum was difficult to remove in the solution purification step and ended up in all electrodialysis products.

Schlagwörter

Stichwörter der Autor:innen

EDTAblack masselectrodialysislithium-ion batteriesrecycling

Autor:innen und Institutionen

  • Division of Minerals and Metallurgical Engineering, Luleå University of Technology, 971 87 Luleå, Sweden.
  • Northvolt Revolt AB, 721 36 Västerås, Sweden.

ORCID-Profile: Adam Isaksson, Juan Anaya Garzon

Förderung

  • European Regional Development Fund
  • European Regional Development Fund and the Green Transition North circular economy

Zitieren

APA

Isaksson, A., Garzon, J. A., Strandkvist, I., & Öqvist, L. S. (2025). Nickel and Cobalt Recovery from Spent Lithium-Ion Batteries via Electrodialysis Metathesis. Membranes, 15(4), 97. https://doi.org/10.3390/membranes15040097

Vancouver

Isaksson A, Garzon JA, Strandkvist I, Öqvist LS. Nickel and Cobalt Recovery from Spent Lithium-Ion Batteries via Electrodialysis Metathesis. Membranes. 2025;15(4):97. doi:10.3390/membranes15040097

BibTeX
@article{Isaksson2025,
  author = {Isaksson, Adam and Garzon, Juan Anaya and Strandkvist, Ida and Öqvist, Lena Sundqvist},
  title = {Nickel and Cobalt Recovery from Spent Lithium-Ion Batteries via Electrodialysis Metathesis},
  journal = {Membranes},
  year = {2025},
  volume = {15},
  number = {4},
  pages = {97},
  doi = {10.3390/membranes15040097}
}
Kostenlos starten →