EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding

Hongyu Shen iD, Liang Wang iD

Materials · 05.09.2024 · 17 (17) · 4386

DOI: 10.3390/ma17174386 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.09.2024. Verfasst von Hongyu Shen und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to improve the wear and corrosion resistance of Ti6Al4V alloy, a Ti-N compound layer was formed on the alloy by plasma nitriding at a relatively low temperature (750 °C) and within an economical processing duration (4 h), in a mixture of NH3 and N2 gases with varying ratios. The influence of the gas mixture on the microstructure, phase composition, and properties of the Ti-N layer was investigated. The results indicated that the thickness of the nitrided layer achieved in a mixed atmosphere with optimal proportions of NH3 and N2 (with a ratio of 1:2) was substantially greater than that obtained in an atmosphere of pure NH3. This suggests that appropriately increasing the proportion of N2 in the nitriding atmosphere is beneficial for the growth of the nitrided layer. The experiments demonstrated that the formation of the surface nitrided layer significantly enhances the corrosion and wear resistance of the titanium alloys.

Schlagwörter

Stichwörter der Autor:innen

Ti6Al4V alloycorrosionhollow cathode dischargeplasma nitridingwear

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Dalian Maritime University, Dalian 116026, China.

ORCID-Profile: Hongyu Shen, Liang Wang

Zitieren

APA

Shen, H., & Wang, L. (2024). Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding. Materials, 17(17), 4386. https://doi.org/10.3390/ma17174386

Vancouver

Shen H, Wang L. Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding. Materials. 2024;17(17):4386. doi:10.3390/ma17174386

BibTeX
@article{Shen2024,
  author = {Shen, Hongyu and Wang, Liang},
  title = {Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4386},
  doi = {10.3390/ma17174386}
}
Kostenlos starten →