EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching

Kaijie Cheng, Ji Wang iD, Guolong Wang, Kun Yang, Wenwu Zhang

Materials · 27.08.2024 · 17 (17) · 4231

DOI: 10.3390/ma17174231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.08.2024. Verfasst von Kaijie Cheng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Pioneer C Project of Chinese Academy of Sciences, Special Foundation of Director of Ningbo Institute of Materials Technology & Engineering.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As an integrable micro-optical device, micro lens arrays (MLAs) have significant applications in modern optical imaging, new energy technology, and advanced displays. In order to reduce the impact of laser modification on wet etching, we propose a technique of femtosecond laser penetration-induced modification-assisted wet etching (FLIPM-WE), which avoids the influence of previous modification layers on subsequent laser pulses and effectively improves the controllability of lens array preparation. We conducted a detailed study on the effects of the laser single pulse energy, pulse number, and hydrofluoric acid etching duration on the morphology of micro lenses and obtained the optimal process parameters. Ultimately, two types of fused silica micro lens arrays with different focal lengths but the same numerical aperture (NA = 0.458) were fabricated using the FLPIM-WE technology. Both arrays exhibited excellent geometric consistency and surface quality (Ra~30 nm). Moreover, they achieved clear imaging at various magnifications with an adjustment range of 1.3×~3.0×. This provides potential technical support for special micro-optical systems.

Schlagwörter

Stichwörter der Autor:innen

femtosecond-laser-induced modificationfused silicaimagingmicro lens arraywet etching

Autor:innen und Institutionen

  • Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
  • Research Center for Laser Extreme Manufacturing, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
  • College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China.

ORCID-Profile: Ji Wang

Förderung

  • National Key Research and Development Program of China
  • Pioneer C Project of Chinese Academy of Sciences
  • Special Foundation of Director of Ningbo Institute of Materials Technology & Engineering
  • the project National Key Research and Development Program of China
  • Chinese Academy of Sciences
  • National Natural Science Foundation of China
  • Special Foundation of Director of Ningbo Institute of Materials Technology & Engineering

Zitieren

APA

Cheng, K., Wang, J., Wang, G., Yang, K., & Zhang, W. (2024). Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching. Materials, 17(17), 4231. https://doi.org/10.3390/ma17174231

Vancouver

Cheng K, Wang J, Wang G, Yang K, Zhang W. Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching. Materials. 2024;17(17):4231. doi:10.3390/ma17174231

BibTeX
@article{Cheng2024,
  author = {Cheng, Kaijie and Wang, Ji and Wang, Guolong and Yang, Kun and Zhang, Wenwu},
  title = {Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4231},
  doi = {10.3390/ma17174231}
}
Kostenlos starten →