EUVIMEDEUVIMED entdecken
Crossref

Fused Silica Microhemispherical Resonators Fabricated by Femtosecond Laser Modification Ultrasonically Assisted Chemical Etching

Haoning Zheng, Qingsong Li, Xiang Xi, Youwang Hu, Xiaoyan Sun, Ji’an Duan

IEEE Sensors Journal · 01.11.2024 · 24 (21) · 34035-34042

DOI: 10.1109/jsen.2024.3449100 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 01.11.2024. Verfasst von Haoning Zheng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused silica is increasingly used in high-performance microhemispherical resonators (MHRs) due to its exceptional mechanical properties and thermal stability. To fabricate the MHRs from fused silica microshell structures, it is necessary to cut the teeth-like tines to ensure good sensing properties. Therefore, the cut sections should have high quality, including smooth surfaces and near-vertical angles. However, cutting fused silica can be challenging. This article presents the use of femtosecond laser modification ultrasonically assisted chemical etching (FLMUCE) to fabricate MHRs with teeth-like tines. A method for achieving high-quality precision machining of MHRs with a roughness of less than 300 nm and a steepness close to 90° was explored through a series of femtosecond laser and chemical etching experiments. The laser Doppler vibrometer (LDV) system was set up to test the performance of the MHR without the metal layer. The quality factor of the ${n} =2$ wineglass modes of the MHRs fabricated by FLMUCE is significantly higher than that of the laser-ablated MHR in the same group, proving the importance of this method for high-performance fused silica MHRs.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zheng, H., Li, Q., Xi, X., Hu, Y., Sun, X., & Duan, J. (2024). Fused Silica Microhemispherical Resonators Fabricated by Femtosecond Laser Modification Ultrasonically Assisted Chemical Etching. IEEE Sensors Journal, 24(21), 34035-34042. https://doi.org/10.1109/jsen.2024.3449100

Vancouver

Zheng H, Li Q, Xi X, Hu Y, Sun X, Duan J. Fused Silica Microhemispherical Resonators Fabricated by Femtosecond Laser Modification Ultrasonically Assisted Chemical Etching. IEEE Sensors Journal. 2024;24(21):34035-34042. doi:10.1109/jsen.2024.3449100

BibTeX
@article{Zheng2024,
  author = {Zheng, Haoning and Li, Qingsong and Xi, Xiang and Hu, Youwang and Sun, Xiaoyan and Duan, Ji’an},
  title = {Fused Silica Microhemispherical Resonators Fabricated by Femtosecond Laser Modification Ultrasonically Assisted Chemical Etching},
  journal = {IEEE Sensors Journal},
  year = {2024},
  volume = {24},
  number = {21},
  pages = {34035--34042},
  doi = {10.1109/jsen.2024.3449100}
}
Kostenlos starten →