EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Application of Numerical Modeling and Finite Element Analysis in Fused Filament Fabrication: A Review

Saeed Behseresht, Young Ho Park iD, Allen Love, Omar Alejandro Valdez Pastrana iD

Materials · 23.08.2024 · 17 (17) · 4185

DOI: 10.3390/ma17174185 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 23.08.2024. Verfasst von Saeed Behseresht und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering, New Mexico State University, Las Cruces, NM 88003, USA. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 110 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) is not necessarily a new process but an advanced method for manufacturing complex three-dimensional (3D) parts. Among the several advantages of AM are the affordable cost, capability of building objects with complex structures for small-batch production, and raw material versatility. There are several sub-categories of AM, among which is fused filament fabrication (FFF), also commonly known as fused deposition modeling (FDM). FFF has been one of the most widely used additive manufacturing techniques due to its cost-efficiency, simplicity, and widespread availability. The FFF process is mainly used to create 3D parts made of thermoplastic polymers, and complex physical phenomena such as melt flow, heat transfer, solidification, crystallization, etc. are involved in the FFF process. Different techniques have been developed and employed to analyze these phenomena, including experimental, analytical, numerical, and finite element analysis (FEA). This study specifically aims to provide a comprehensive review of the developed numerical models and simulation tools used to analyze melt flow behavior, heat transfer, crystallization and solidification kinetics, structural analysis, and the material characterization of polymeric components in the FFF process. The strengths and weaknesses of these numerical models are discussed, simplifications and assumptions are highlighted, and an outlook on future work in the numerical modeling and FE simulation of FFF is provided.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingfinite element analysisfused deposition modelingnumerical modeling

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering, New Mexico State University, Las Cruces, NM 88003, USA.

ORCID-Profile: Young Ho Park, Omar Alejandro Valdez Pastrana

Zitieren

APA

Behseresht, S., Park, Y. H., Love, A., & Valdez Pastrana, O. A. (2024). Application of Numerical Modeling and Finite Element Analysis in Fused Filament Fabrication: A Review. Materials, 17(17), 4185. https://doi.org/10.3390/ma17174185

Vancouver

Behseresht S, Park YH, Love A, Valdez Pastrana OA. Application of Numerical Modeling and Finite Element Analysis in Fused Filament Fabrication: A Review. Materials. 2024;17(17):4185. doi:10.3390/ma17174185

BibTeX
@article{Behseresht2024,
  author = {Behseresht, Saeed and Park, Young Ho and Love, Allen and Valdez Pastrana, Omar Alejandro},
  title = {Application of Numerical Modeling and Finite Element Analysis in Fused Filament Fabrication: A Review},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4185},
  doi = {10.3390/ma17174185}
}
Kostenlos starten →