EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Fused Filament Fabrication for Metallic Materials: A Brief Review

Jose M Costa iD, Elsa W Sequeiros iD, Manuel F Vieira iD

Materials · 05.12.2023 · 16 (24) · 7505

DOI: 10.3390/ma16247505 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 05.12.2023. Verfasst von Jose M Costa und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical and Materials Engineering, Faculty of Engineering, University of Porto, R. Dr. Roberto Frias, 4200-465 Porto, Portugal. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 160 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused filament fabrication (FFF) is an extrusion-based additive manufacturing (AM) technology mostly used to produce thermoplastic parts. However, producing metallic or ceramic parts by FFF is also a sintered-based AM process. FFF for metallic parts can be divided into five steps: (1) raw material selection and feedstock mixture (including palletization), (2) filament production (extrusion), (3) production of AM components using the filament extrusion process, (4) debinding, and (5) sintering. These steps are interrelated, where the parameters interact with the others and have a key role in the integrity and quality of the final metallic parts. FFF can produce high-accuracy and complex metallic parts, potentially revolutionizing the manufacturing industry and taking AM components to a new level. In the FFF technology for metallic materials, material compatibility, production quality, and cost-effectiveness are the challenges to overcome to make it more competitive compared to other AM technologies, like the laser processes. This review provides a comprehensive overview of the recent developments in FFF for metallic materials, including the metals and binders used, the challenges faced, potential applications, and the impact of FFF on the manufacturing (prototyping and end parts), design freedom, customization, sustainability, supply chain, among others.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingfused filament fabricationmaterial extrusionmetallic materialssolid-state processes

Autor:innen und Institutionen

  • Department of Metallurgical and Materials Engineering, Faculty of Engineering, University of Porto, R. Dr. Roberto Frias, 4200-465 Porto, Portugal.
  • LAETA/INEGI-Institute of Science and Innovation in Mechanical and Industrial Engineering, R. Dr. Roberto Frias, 4200-465 Porto, Portugal.

ORCID-Profile: Jose M Costa, Elsa W Sequeiros, Manuel F Vieira

Zitieren

APA

Costa, J. M., Sequeiros, E. W., & Vieira, M. F. (2023). Fused Filament Fabrication for Metallic Materials: A Brief Review. Materials, 16(24), 7505. https://doi.org/10.3390/ma16247505

Vancouver

Costa JM, Sequeiros EW, Vieira MF. Fused Filament Fabrication for Metallic Materials: A Brief Review. Materials. 2023;16(24):7505. doi:10.3390/ma16247505

BibTeX
@article{Costa2023,
  author = {Costa, Jose M and Sequeiros, Elsa W and Vieira, Manuel F},
  title = {Fused Filament Fabrication for Metallic Materials: A Brief Review},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {24},
  pages = {7505},
  doi = {10.3390/ma16247505}
}
Kostenlos starten →