Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink
Materials · 13.08.2024 · 17 (16) · 4021
DOI: 10.3390/ma17164021 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.08.2024. Verfasst von Youchang Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Key Laboratory for Powder Technology Research and Development, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Fundamental Research Funds for the Central Universities, Joint Key Fund Program for Regional Innovation Development of the Chemistry Division of the National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Simple and scalable production of micro-supercapacitors (MSCs) is crucial to address the energy requirements of miniature electronics. Although significant advancements have been achieved in fabricating MSCs through solution-based printing techniques, the realization of high-performance MSCs remains a challenge. In this paper, graphene-based MSCs with a high power density were prepared through screen printing of aqueous conductive inks with appropriate rheological properties. High electrical conductivity (2.04 × 104 S∙m−1) and low equivalent series resistance (46.7 Ω) benefiting from the dense conductive network consisting of the mesoporous structure formed by graphene with carbon black dispersed as linkers, as well as the narrow finger width and interspace (200 µm) originating from the excellent printability, prompted the fully printed MSCs to deliver high capacitance (9.15 mF∙cm−2), energy density (1.30 µWh∙cm−2) and ultrahigh power density (89.9 mW∙cm−2). Notably, the resulting MSCs can effectively operate at scan rates up to 200 V∙s−1, which surpasses conventional supercapacitors by two orders of magnitude. In addition, the MSCs demonstrate excellent cycling stability (91.6% capacity retention and ~100% Coulombic efficiency after 10,000 cycles) and extraordinary mechanical properties (92.2% capacity retention after 5000 bending cycles), indicating their broad application prospects in flexible wearable/portable electronic systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Beijing Key Laboratory for Powder Technology Research and Development, Beihang University, Beijing 100191, China.
- School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China.
ORCID-Profile: Youchang Wang
Förderung
- the Fundamental Research Funds for the Central Universities
- Joint Key Fund Program for Regional Innovation Development of the Chemistry Division of the National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Natural Science Foundation of Beijing Municipality
- Beijing Municipal Commission of Education
Zitieren
APA
Wang, Y., Zhang, X., Zhu, Y., Li, X., & Shen, Z. (2024). Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink. Materials, 17(16), 4021. https://doi.org/10.3390/ma17164021
Vancouver
Wang Y, Zhang X, Zhu Y, Li X, Shen Z. Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink. Materials. 2024;17(16):4021. doi:10.3390/ma17164021
BibTeX
@article{Wang2024,
author = {Wang, Youchang and Zhang, Xiaojing and Zhu, Yuwei and Li, Xiaolu and Shen, Zhigang},
title = {Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink},
journal = {Materials},
year = {2024},
volume = {17},
number = {16},
pages = {4021},
doi = {10.3390/ma17164021}
}
EUVIMED