EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable MXene/Conductive Cellulose Heteroinks for 3D Printed High Areal Energy Density Micro‐Supercapacitors and Self‐Powered Integrated Systems

Chunling Cao, Shiyao Tang, Xiaofei Wu, Haibo Huang, Shouxin Liu, Hongpeng Li iD

Advanced Science · 2025-11 · 12 (41)

DOI: 10.1002/advs.202511439 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 12.08.2025. Verfasst von Chunling Cao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Bio-Based Material Science and Technology (Ministry of Education), Northeast Forestry University, Harbin, 150040, China. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, Heilongjiang Natural Science Fund, Jiangsu Young Elite Scientists Sponsorship Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The additive manufacturing of micro‐supercapacitors (MSCs) with outstanding areal energy density and scalable integration remains challenging due to the incompatibility between printability and functionality of electronic ink. Here, a thixotropic MXene/conductive cellulose heteroink is formulated, eliminating the need for tedious processing and toxic organic additives, to construct MSCs with high areal energy density. Conductive cellulose with radially graded structure containing defect‐rich graphitic shells not only inhibits MXene re‐stacking through hydrogen‐bonded 3D porous networks, but also establishes sp 2 ‐carbon pathways for rapid electron transport. The optimized 3D printed MSCs achieve record‐breaking metrics: high areal capacitance of 3.12 F cm −2 (1 mA cm −2 ), outstanding energy density of 1.25 mWh cm −2 , and 95% capacitance retention after 10 000 bending cycles. Notably, the 3D printed MSCs can operate stably within a temperature range of −40 to 60 °C. In addition, an integrated flexible sensing system incorporating 3D printed MSCs and strain sensors is demonstrated, which is highly sensitive for real‐time motion monitoring. This work establishes a materials‐by‐design paradigm for customizable micro‐energy systems, advancing wearable and implantable electronics.

Schlagwörter

Stichwörter der Autor:innen

3D printingMXeneconductive cellulosemicro‐supercapacitorsself‐powered integrated system

Autor:innen und Institutionen

  • Key Laboratory of Bio-Based Material Science and Technology (Ministry of Education), Northeast Forestry University, Harbin, 150040, China.
  • College of Mechanical Engineering, Yangzhou University, Yangzhou, 225127, China.
  • School of Automotive Engineering, Nantong Institute of Technology, Nantong, 226001, China.

ORCID-Profile: Hongpeng Li

Förderung

  • Fundamental Research Funds for the Central Universities
  • Heilongjiang Natural Science Fund
  • Jiangsu Young Elite Scientists Sponsorship Program
  • Qinglan Project of Yangzhou University

Zitieren

APA

Cao, C., Tang, S., Wu, X., Huang, H., Liu, S., & Li, H. (2025). Sustainable MXene/Conductive Cellulose Heteroinks for 3D Printed High Areal Energy Density Micro‐Supercapacitors and Self‐Powered Integrated Systems. Advanced Science, 12(41). https://doi.org/10.1002/advs.202511439

Vancouver

Cao C, Tang S, Wu X, Huang H, Liu S, Li H. Sustainable MXene/Conductive Cellulose Heteroinks for 3D Printed High Areal Energy Density Micro‐Supercapacitors and Self‐Powered Integrated Systems. Advanced Science. 2025;12(41). doi:10.1002/advs.202511439

BibTeX
@article{Cao2025,
  author = {Cao, Chunling and Tang, Shiyao and Wu, Xiaofei and Huang, Haibo and Liu, Shouxin and Li, Hongpeng},
  title = {Sustainable MXene/Conductive Cellulose Heteroinks for 3D Printed High Areal Energy Density Micro‐Supercapacitors and Self‐Powered Integrated Systems},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {41},
  doi = {10.1002/advs.202511439}
}
Kostenlos starten →