The Irradiation Effects in Ferritic, Ferritic–Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review
Materials · 10.07.2024 · 17 (14) · 3409
DOI: 10.3390/ma17143409 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 10.07.2024. Verfasst von Natália Luptáková und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 257 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiří Svoboda, Czech Science Foundation.
Abstract (Originalsprache)
High-performance structural materials (HPSMs) are needed for the successful and safe design of fission and fusion reactors. Their operation is associated with unprecedented fluxes of high-energy neutrons and thermomechanical loadings. In fission reactors, HPSMs are used, e.g., for fuel claddings, core internal structural components and reactor pressure vessels. Even stronger requirements are expected for fourth-generation supercritical water fission reactors, with a particular focus on the HPSM’s corrosion resistance. The first wall and blanket structural materials in fusion reactors are subjected not only to high energy neutron irradiation, but also to strong mechanical, heat and electromagnetic loadings. This paper presents a historical and state-of-the-art summary focused on the properties and application potential of irradiation-resistant alloys predominantly strengthened by an oxide dispersion. These alloys are categorized according to their matrix as ferritic, ferritic–martensitic and austenitic. Low void swelling, high-temperature He embrittlement, thermal and irradiation hardening and creep are typical phenomena most usually studied in ferritic and ferritic martensitic oxide dispersion strengthened (ODS) alloys. In contrast, austenitic ODS alloys exhibit an increased corrosion and oxidation resistance and a higher creep resistance at elevated temperatures. This is why the advantages and drawbacks of each matrix-type ODS are discussed in this paper.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62 Brno, Czech Republic.
ORCID-Profile: Natália Luptáková, Denisa Bártková, Adam Weiser, Antonín Dlouhý
Förderung
- Jiří Svoboda
- Czech Science Foundation
Zitieren
APA
Luptáková, N., Svoboda, J., Bártková, D., Weiser, A., & Dlouhý, A. (2024). The Irradiation Effects in Ferritic, Ferritic–Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review. Materials, 17(14), 3409. https://doi.org/10.3390/ma17143409
Vancouver
Luptáková N, Svoboda J, Bártková D, Weiser A, Dlouhý A. The Irradiation Effects in Ferritic, Ferritic–Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review. Materials. 2024;17(14):3409. doi:10.3390/ma17143409
BibTeX
@article{Luptkov2024,
author = {Luptáková, Natália and Svoboda, Jiří and Bártková, Denisa and Weiser, Adam and Dlouhý, Antonín},
title = {The Irradiation Effects in Ferritic, Ferritic–Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3409},
doi = {10.3390/ma17143409}
}
EUVIMED