Modeling and Strength Calculations of Parts Made Using 3D Printing Technology and Mounted in a Custom-Made Lower Limb Exoskeleton
Materials · 10.07.2024 · 17 (14) · 3406
DOI: 10.3390/ma17143406 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.07.2024. Verfasst von Szczepan Śpiewak und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Mechanics and Machine Design, Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, ul. Dabrowsk…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center of Poland.
Abstract (Originalsprache)
This study is focused on the application of 3D-printed elements and conventional elements to create a prototype of a custom-made exoskeleton for lower limb rehabilitation. The 3D-printed elements were produced by using Fused Deposition Modeling technology and acrylonitrile butadiene styrene (ABS) material. The scope of this work involved the design and construction of an exoskeleton, experimental testing of the ABS material and numerical research by using the finite element method. On the basis of the obtained results, it was possible to deduce whether the load-bearing 3D-printed elements can be used in the proposed mechanical construction. The work contains full data of the material models used in FEM modeling, taking into account the orthotropic properties of the ABS material. Various types of finite elements were used in the presented FE models. The work is a comprehensive combination of material testing issues with the possibility of implementing the obtained results in numerical strength models of machine parts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Mechanics and Machine Design, Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, ul. Dabrowskiego 73, 42-201 Czestochowa, Poland.
- Faculty of Mechanical Engineering and Ship Technology, Gdansk University of Techology, ul. Narutowicza 11/12, 80-233 Gdansk, Poland.
- Department of Automation Biomechanics and Mechatronics, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Lodz, Poland.
- Department of Production Engineering and Safety, Czestochowa University of Technology, ul. Dabrowskiego 69, 42-201 Czestochowa, Poland.
ORCID-Profile: Szczepan Śpiewak, Wiktoria Wojnicz, Jan Awrejcewicz, Magdalena Mazur, Michał Ludwicki, Bartłomiej Zagrodny
Förderung
- National Science Center of Poland
Zitieren
APA
Śpiewak, S., Wojnicz, W., Awrejcewicz, J., Mazur, M., Ludwicki, M., Stańczyk, B., & Zagrodny, B. (2024). Modeling and Strength Calculations of Parts Made Using 3D Printing Technology and Mounted in a Custom-Made Lower Limb Exoskeleton. Materials, 17(14), 3406. https://doi.org/10.3390/ma17143406
Vancouver
Śpiewak S, Wojnicz W, Awrejcewicz J, Mazur M, Ludwicki M, Stańczyk B, et al. Modeling and Strength Calculations of Parts Made Using 3D Printing Technology and Mounted in a Custom-Made Lower Limb Exoskeleton. Materials. 2024;17(14):3406. doi:10.3390/ma17143406
BibTeX
@article{piewak2024,
author = {Śpiewak, Szczepan and Wojnicz, Wiktoria and Awrejcewicz, Jan and Mazur, Magdalena and Ludwicki, Michał and Stańczyk, Bartosz and Zagrodny, Bartłomiej},
title = {Modeling and Strength Calculations of Parts Made Using 3D Printing Technology and Mounted in a Custom-Made Lower Limb Exoskeleton},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3406},
doi = {10.3390/ma17143406}
}
EUVIMED