A Methodology for Shielding-Gas Selection in Wire Arc Additive Manufacturing with Stainless Steel
Materials · 05.07.2024 · 17 (13) · 3328
DOI: 10.3390/ma17133328 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.07.2024. Verfasst von Felipe Ribeiro Teixeira und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Research and Development of Welding Processes, Federal University of Uberlandia, Uberlândia 38400-901, Brazil. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Linde GmbH Gas Division, National Council for Scientific and Technological Development - CNPq, Coordination for the Improvement of Higher Education Personnel - CAPES.
Abstract (Originalsprache)
The main objective of this work was to propose and evaluate a methodology for shielding-gas selection in additive manufacturing assisted by wire arc additive manufacturing (WAAM) with an austenitic stainless steel as feedstock. To validate the proposed methodology, the impact of multi-component gases was valued using three different Ar-based blends recommended as shielding gas for GMA (gas metal arc) of the target material, using CMT (cold metal transfer) as the process version. This assessment considered features that potentially affect the building of the case study of thin walls, such as metal transfer regularity, deposition time, and geometrical and metallurgical characteristics. Different settings of wire-feed speeds were conceived to maintain a similar mean current (first constraint for comparison’s sake) among the three gas blends. This approach implied different mean wire-feed speeds and simultaneously forced a change in the deposition speed to maintain the same amount of material deposited per unit of length (second comparison constraint). The composition of the gases affects the operational performance of the shielding gases. It was concluded that by following this methodology, shielding-gas selection decision-making is possible based on the perceived characteristics of the different commercial blends.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Research and Development of Welding Processes, Federal University of Uberlandia, Uberlândia 38400-901, Brazil.
- Linde GmbH, Linde Technologies, Department of Arc Technologies, 85716 Munich, Germany.
- Department of Engineering Science, University West, 461 86 Trollhättan, Sweden.
ORCID-Profile: Vinicius Lemes Jorge, Americo Scotti
Förderung
- Linde GmbH Gas Division
- National Council for Scientific and Technological Development - CNPq
- Coordination for the Improvement of Higher Education Personnel - CAPES
- National Council for Scientific and Technological Development—CNPq
- Coordination for the Improvement of Higher Education Personnel—CAPES
Zitieren
APA
Teixeira, F. R., Jorge, V. L., Scotti, F. M., Siewert, E., & Scotti, A. (2024). A Methodology for Shielding-Gas Selection in Wire Arc Additive Manufacturing with Stainless Steel. Materials, 17(13), 3328. https://doi.org/10.3390/ma17133328
Vancouver
Teixeira FR, Jorge VL, Scotti FM, Siewert E, Scotti A. A Methodology for Shielding-Gas Selection in Wire Arc Additive Manufacturing with Stainless Steel. Materials. 2024;17(13):3328. doi:10.3390/ma17133328
BibTeX
@article{Teixeira2024,
author = {Teixeira, Felipe Ribeiro and Jorge, Vinicius Lemes and Scotti, Fernando Matos and Siewert, Erwan and Scotti, Americo},
title = {A Methodology for Shielding-Gas Selection in Wire Arc Additive Manufacturing with Stainless Steel},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3328},
doi = {10.3390/ma17133328}
}
EUVIMED