EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting

Zhongwei Zhan, Qi Zhang, Shuaixing Wang iD, Xiaohui Liu, Hao Zhang, Zhihua Sun, Yulin Ge, Nan Du

Materials · 04.07.2024 · 17 (13) · 3322

DOI: 10.3390/ma17133322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.07.2024. Verfasst von Zhongwei Zhan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Aviation Key Laboratory of Science and Technology on Advanced Corrosion and Protection for Aviation Material, AECC Beijing Institute of Aeronautical …. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Major Discipline Academic and Technical Leaders Training Program of Jiangxi Province, Open Fund of the Key Laboratory for Microstructural Control of Metallic Materials of Jiangxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The non-equilibrium solidification process in the additive manufacturing of titanium alloy leads to special microstructures, and the resulting changes in corrosion behavior are worthy of attention. In this paper, the microstructure and electrochemical corrosion behavior of Ti6Al4V alloys prepared using laser powder bed melting (LPBF) and casting are systematically compared. The results show that the LPBF-processed Ti6Al4V alloy is composed of dominant acicular α′ martensite within columnar prior β phase, and less β disperses have also been discovered, which is significantly different from the α + β dual-phase structure of cast Ti6Al4V alloy. Compared to the as-cast Ti6Al4V alloy, LPBF-processed Ti6Al4V alloy has a thinner and unstable passive film, and exhibits slightly poorer corrosion resistance, which is mainly related to its higher porosity, a large amount of acicular α′ martensite and less β phase compared to as-cast Ti6Al4V alloy. This result proves that suitable methods should be taken to control the relative density and phase composition of LPBF-processed Ti6Al4V alloys before application.

Schlagwörter

Stichwörter der Autor:innen

Ti6Al4V alloyadditive manufacturingcorrosion resistancelaser powder bed fusion

Autor:innen und Institutionen

  • Aviation Key Laboratory of Science and Technology on Advanced Corrosion and Protection for Aviation Material, AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China.
  • School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China.

ORCID-Profile: Shuaixing Wang

Förderung

  • National Natural Science Foundation of China
  • Major Discipline Academic and Technical Leaders Training Program of Jiangxi Province
  • Open Fund of the Key Laboratory for Microstructural Control of Metallic Materials of Jiangxi Province
  • Doctoral Research Initiation Fund of Nanchang Hangkong University

Zitieren

APA

Zhan, Z., Zhang, Q., Wang, S., Liu, X., Zhang, H., Sun, Z., Ge, Y., & Du, N. (2024). Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting. Materials, 17(13), 3322. https://doi.org/10.3390/ma17133322

Vancouver

Zhan Z, Zhang Q, Wang S, Liu X, Zhang H, Sun Z, et al. Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting. Materials. 2024;17(13):3322. doi:10.3390/ma17133322

BibTeX
@article{Zhan2024,
  author = {Zhan, Zhongwei and Zhang, Qi and Wang, Shuaixing and Liu, Xiaohui and Zhang, Hao and Sun, Zhihua and Ge, Yulin and Du, Nan},
  title = {Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3322},
  doi = {10.3390/ma17133322}
}
Kostenlos starten →